path: root/modules/caddyhttp/reverseproxy/httptransport.go

// Copyright 2015 Matthew Holt and The Caddy Authors
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//     http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.

package reverseproxy

import (
	"context"
	"crypto/tls"
	"crypto/x509"
	"encoding/base64"
	"fmt"
	weakrand "math/rand"
	"net"
	"net/http"
	"os"
	"reflect"
	"strings"
	"time"

	"github.com/caddyserver/caddy/v2"
	"github.com/caddyserver/caddy/v2/modules/caddytls"
	"go.uber.org/zap"
	"golang.org/x/net/http2"
)

func init() {
	caddy.RegisterModule(HTTPTransport{})
}

// HTTPTransport is essentially a configuration wrapper for http.Transport.
// It defines a JSON structure useful when configuring the HTTP transport
// for Caddy's reverse proxy. It builds its http.Transport at Provision.
type HTTPTransport struct {
	// TODO: It's possible that other transports (like fastcgi) might be
	// able to borrow/use at least some of these config fields; if so,
	// maybe move them into a type called CommonTransport and embed it?

	// Configures the DNS resolver used to resolve the IP address of upstream hostnames.
	Resolver *UpstreamResolver `json:"resolver,omitempty"`

	// Configures TLS to the upstream. Setting this to an empty struct
	// is sufficient to enable TLS with reasonable defaults.
	TLS *TLSConfig `json:"tls,omitempty"`

	// Configures HTTP Keep-Alive (enabled by default). Should only be
	// necessary if rigorous testing has shown that tuning this helps
	// improve performance.
	KeepAlive *KeepAlive `json:"keep_alive,omitempty"`

	// Whether to enable compression to upstream. Default: true
	Compression *bool `json:"compression,omitempty"`

	// Maximum number of connections per host. Default: 0 (no limit)
	MaxConnsPerHost int `json:"max_conns_per_host,omitempty"`

	// How long to wait before timing out trying to connect to
	// an upstream. Default: `3s`.
	DialTimeout caddy.Duration `json:"dial_timeout,omitempty"`

	// How long to wait before spawning an RFC 6555 Fast Fallback
	// connection. A negative value disables this. Default: `300ms`.
	FallbackDelay caddy.Duration `json:"dial_fallback_delay,omitempty"`

	// How long to wait for reading response headers from server. Default: No timeout.
	ResponseHeaderTimeout caddy.Duration `json:"response_header_timeout,omitempty"`

	// The length of time to wait for a server's first response
	// headers after fully writing the request headers if the
	// request has a header "Expect: 100-continue". Default: No timeout.
	ExpectContinueTimeout caddy.Duration `json:"expect_continue_timeout,omitempty"`

	// The maximum bytes to read from response headers. Default: `10MiB`.
	MaxResponseHeaderSize int64 `json:"max_response_header_size,omitempty"`

	// The size of the write buffer in bytes. Default: `4KiB`.
	WriteBufferSize int `json:"write_buffer_size,omitempty"`

	// The size of the read buffer in bytes. Default: `4KiB`.
	ReadBufferSize int `json:"read_buffer_size,omitempty"`

	// The maximum time to wait for next read from backend. Default: no timeout.
	ReadTimeout caddy.Duration `json:"read_timeout,omitempty"`

	// The maximum time to wait for next write to backend. Default: no timeout.
	WriteTimeout caddy.Duration `json:"write_timeout,omitempty"`

	// The versions of HTTP to support. As a special case, "h2c"
	// can be specified to use H2C (HTTP/2 over Cleartext) to the
	// upstream (this feature is experimental and subject to
	// change or removal). Default: ["1.1", "2"]
	Versions []string `json:"versions,omitempty"`

	// The pre-configured underlying HTTP transport.
	Transport *http.Transport `json:"-"`

	h2cTransport *http2.Transport
}

// CaddyModule returns the Caddy module information.
func (HTTPTransport) CaddyModule() caddy.ModuleInfo {
	return caddy.ModuleInfo{
		ID:  "http.reverse_proxy.transport.http",
		New: func() caddy.Module { return new(HTTPTransport) },
	}
}

// Provision sets up h.Transport with a *http.Transport
// that is ready to use.
func (h *HTTPTransport) Provision(ctx caddy.Context) error {
	if len(h.Versions) == 0 {
		h.Versions = []string{"1.1", "2"}
	}

	rt, err := h.NewTransport(ctx)
	if err != nil {
		return err
	}
	h.Transport = rt

	return nil
}

// NewTransport builds a standard-lib-compatible http.Transport value from h.
func (h *HTTPTransport) NewTransport(caddyCtx caddy.Context) (*http.Transport, error) {
	// Set keep-alive defaults if it wasn't otherwise configured
	if h.KeepAlive == nil {
		h.KeepAlive = &KeepAlive{
			ProbeInterval:       caddy.Duration(30 * time.Second),
			IdleConnTimeout:     caddy.Duration(2 * time.Minute),
			MaxIdleConnsPerHost: 32, // seems about optimal, see #2805
		}
	}

	// Set a relatively short default dial timeout.
	// This is helpful to make load-balancer retries more speedy.
	if h.DialTimeout == 0 {
		h.DialTimeout = caddy.Duration(3 * time.Second)
	}

	dialer := &net.Dialer{
		Timeout:       time.Duration(h.DialTimeout),
		FallbackDelay: time.Duration(h.FallbackDelay),
	}

	if h.Resolver != nil {
		err := h.Resolver.ParseAddresses()
		if err != nil {
			return nil, err
		}
		d := &net.Dialer{
			Timeout:       time.Duration(h.DialTimeout),
			FallbackDelay: time.Duration(h.FallbackDelay),
		}
		dialer.Resolver = &net.Resolver{
			PreferGo: true,
			Dial: func(ctx context.Context, _, _ string) (net.Conn, error) {
				//nolint:gosec
				addr := h.Resolver.netAddrs[weakrand.Intn(len(h.Resolver.netAddrs))]
				return d.DialContext(ctx, addr.Network, addr.JoinHostPort(0))
			},
		}
	}

	// Set up the dialer to pull the correct information from the context
	dialContext := func(ctx context.Context, network, address string) (net.Conn, error) {
		// the proper dialing information should be embedded into the request's context
		if dialInfo, ok := GetDialInfo(ctx); ok {
			network = dialInfo.Network
			address = dialInfo.Address
		}

		conn, err := dialer.DialContext(ctx, network, address)
		if err != nil {
			// identify this error as one that occurred during
			// dialing, which can be important when trying to
			// decide whether to retry a request
			return nil, DialError{err}
		}

		// if read/write timeouts are configured and this is a TCP connection, enforce the timeouts
		// by wrapping the connection with our own type
		if tcpConn, ok := conn.(*net.TCPConn); ok && (h.ReadTimeout > 0 || h.WriteTimeout > 0) {
			conn = &tcpRWTimeoutConn{
				TCPConn:      tcpConn,
				readTimeout:  time.Duration(h.ReadTimeout),
				writeTimeout: time.Duration(h.WriteTimeout),
				logger:       caddyCtx.Logger(h),
			}
		}

		return conn, nil
	}

	rt := &http.Transport{
		DialContext:            dialContext,
		MaxConnsPerHost:        h.MaxConnsPerHost,
		ResponseHeaderTimeout:  time.Duration(h.ResponseHeaderTimeout),
		ExpectContinueTimeout:  time.Duration(h.ExpectContinueTimeout),
		MaxResponseHeaderBytes: h.MaxResponseHeaderSize,
		WriteBufferSize:        h.WriteBufferSize,
		ReadBufferSize:         h.ReadBufferSize,
	}

	if h.TLS != nil {
		rt.TLSHandshakeTimeout = time.Duration(h.TLS.HandshakeTimeout)
		var err error
		rt.TLSClientConfig, err = h.TLS.MakeTLSClientConfig(caddyCtx)
		if err != nil {
			return nil, fmt.Errorf("making TLS client config: %v", err)
		}
	}

	if h.KeepAlive != nil {
		dialer.KeepAlive = time.Duration(h.KeepAlive.ProbeInterval)
		if h.KeepAlive.Enabled != nil {
			rt.DisableKeepAlives = !*h.KeepAlive.Enabled
		}
		rt.MaxIdleConns = h.KeepAlive.MaxIdleConns
		rt.MaxIdleConnsPerHost = h.KeepAlive.MaxIdleConnsPerHost
		rt.IdleConnTimeout = time.Duration(h.KeepAlive.IdleConnTimeout)
	}

	if h.Compression != nil {
		rt.DisableCompression = !*h.Compression
	}

	if sliceContains(h.Versions, "2") {
		if err := http2.ConfigureTransport(rt); err != nil {
			return nil, err
		}
	}

	// if h2c is enabled, configure its transport (std lib http.Transport
	// does not "HTTP/2 over cleartext TCP")
	if sliceContains(h.Versions, "h2c") {
		// crafting our own http2.Transport doesn't allow us to utilize
		// most of the customizations/preferences on the http.Transport,
		// because, for some reason, only http2.ConfigureTransport()
		// is allowed to set the unexported field that refers to a base
		// http.Transport config; oh well
		h2t := &http2.Transport{
			// kind of a hack, but for plaintext/H2C requests, pretend to dial TLS
			DialTLSContext: func(ctx context.Context, network, address string, _ *tls.Config) (net.Conn, error) {
				return dialContext(ctx, network, address)
			},
			AllowHTTP: true,
		}
		if h.Compression != nil {
			h2t.DisableCompression = !*h.Compression
		}
		h.h2cTransport = h2t
	}

	return rt, nil
}

// replaceTLSServername checks TLS servername to see if it needs replacing
// if it does need replacing, it creates a new cloned HTTPTransport object to avoid any races
// and does the replacing of the TLS servername on that and returns the new object
// if no replacement is necessary it returns the original
func (h *HTTPTransport) replaceTLSServername(repl *caddy.Replacer) *HTTPTransport {
	// check whether we have TLS and need to replace the servername in the TLSClientConfig
	if h.TLSEnabled() && strings.Contains(h.TLS.ServerName, "{") {
		// make a new h, "copy" the parts we don't need to touch, add a new *tls.Config and replace servername
		newtransport := &HTTPTransport{
			Resolver:              h.Resolver,
			TLS:                   h.TLS,
			KeepAlive:             h.KeepAlive,
			Compression:           h.Compression,
			MaxConnsPerHost:       h.MaxConnsPerHost,
			DialTimeout:           h.DialTimeout,
			FallbackDelay:         h.FallbackDelay,
			ResponseHeaderTimeout: h.ResponseHeaderTimeout,
			ExpectContinueTimeout: h.ExpectContinueTimeout,
			MaxResponseHeaderSize: h.MaxResponseHeaderSize,
			WriteBufferSize:       h.WriteBufferSize,
			ReadBufferSize:        h.ReadBufferSize,
			Versions:              h.Versions,
			Transport:             h.Transport.Clone(),
			h2cTransport:          h.h2cTransport,
		}
		newtransport.Transport.TLSClientConfig.ServerName = repl.ReplaceAll(newtransport.Transport.TLSClientConfig.ServerName, "")
		return newtransport
	}

	return h
}

// RoundTrip implements http.RoundTripper.
func (h *HTTPTransport) RoundTrip(req *http.Request) (*http.Response, error) {
	// Try to replace TLS servername if needed
	repl := req.Context().Value(caddy.ReplacerCtxKey).(*caddy.Replacer)
	transport := h.replaceTLSServername(repl)

	transport.SetScheme(req)

	// if H2C ("HTTP/2 over cleartext") is enabled and the upstream request is
	// HTTP without TLS, use the alternate H2C-capable transport instead
	if req.URL.Scheme == "http" && h.h2cTransport != nil {
		return h.h2cTransport.RoundTrip(req)
	}

	return transport.Transport.RoundTrip(req)
}

// SetScheme ensures that the outbound request req
// has the scheme set in its URL; the underlying
// http.Transport requires a scheme to be set.
//
// This method may be used by other transport modules
// that wrap/use this one.
func (h *HTTPTransport) SetScheme(req *http.Request) {
	if req.URL.Scheme != "" {
		return
	}
	if h.shouldUseTLS(req) {
		req.URL.Scheme = "https"
	} else {
		req.URL.Scheme = "http"
	}
}

// shouldUseTLS returns true if TLS should be used for req.
func (h *HTTPTransport) shouldUseTLS(req *http.Request) bool {
	if h.TLS == nil {
		return false
	}

	port := req.URL.Port()
	for i := range h.TLS.ExceptPorts {
		if h.TLS.ExceptPorts[i] == port {
			return false
		}
	}

	return true
}

// TLSEnabled returns true if TLS is enabled.
func (h HTTPTransport) TLSEnabled() bool {
	return h.TLS != nil
}

// EnableTLS enables TLS on the transport.
func (h *HTTPTransport) EnableTLS(base *TLSConfig) error {
	h.TLS = base
	return nil
}

// Cleanup implements caddy.CleanerUpper and closes any idle connections.
func (h HTTPTransport) Cleanup() error {
	if h.Transport == nil {
		return nil
	}
	h.Transport.CloseIdleConnections()
	return nil
}

// TLSConfig holds configuration related to the TLS configuration for the
// transport/client.
type TLSConfig struct {
	// Optional list of base64-encoded DER-encoded CA certificates to trust.
	RootCAPool []string `json:"root_ca_pool,omitempty"`

	// List of PEM-encoded CA certificate files to add to the same trust
	// store as RootCAPool (or root_ca_pool in the JSON).
	RootCAPEMFiles []string `json:"root_ca_pem_files,omitempty"`

	// PEM-encoded client certificate filename to present to servers.
	ClientCertificateFile string `json:"client_certificate_file,omitempty"`

	// PEM-encoded key to use with the client certificate.
	ClientCertificateKeyFile string `json:"client_certificate_key_file,omitempty"`

	// If specified, Caddy will use and automate a client certificate
	// with this subject name.
	ClientCertificateAutomate string `json:"client_certificate_automate,omitempty"`

	// If true, TLS verification of server certificates will be disabled.
	// This is insecure and may be removed in the future. Do not use this
	// option except in testing or local development environments.
	InsecureSkipVerify bool `json:"insecure_skip_verify,omitempty"`

	// The duration to allow a TLS handshake to a server. Default: No timeout.
	HandshakeTimeout caddy.Duration `json:"handshake_timeout,omitempty"`

	// The server name used when verifying the certificate received in the TLS
	// handshake. By default, this will use the upstream address' host part.
	// You only need to override this if your upstream address does not match the
	// certificate the upstream is likely to use. For example if the upstream
	// address is an IP address, then you would need to configure this to the
	// hostname being served by the upstream server. Currently, this does not
	// support placeholders because the TLS config is not provisioned on each
	// connection, so a static value must be used.
	ServerName string `json:"server_name,omitempty"`

	// TLS renegotiation level. TLS renegotiation is the act of performing
	// subsequent handshakes on a connection after the first.
	// The level can be:
	//  - "never": (the default) disables renegotiation.
	//  - "once": allows a remote server to request renegotiation once per connection.
	//  - "freely": allows a remote server to repeatedly request renegotiation.
	Renegotiation string `json:"renegotiation,omitempty"`

	// Skip TLS ports specifies a list of upstream ports on which TLS should not be
	// attempted even if it is configured. Handy when using dynamic upstreams that
	// return HTTP and HTTPS endpoints too.
	// When specified, TLS will automatically be configured on the transport.
	// The value can be a list of any valid tcp port numbers, default empty.
	ExceptPorts []string `json:"except_ports,omitempty"`
}

// MakeTLSClientConfig returns a tls.Config usable by a client to a backend.
// If there is no custom TLS configuration, a nil config may be returned.
func (t TLSConfig) MakeTLSClientConfig(ctx caddy.Context) (*tls.Config, error) {
	cfg := new(tls.Config)

	// client auth
	if t.ClientCertificateFile != "" && t.ClientCertificateKeyFile == "" {
		return nil, fmt.Errorf("client_certificate_file specified without client_certificate_key_file")
	}
	if t.ClientCertificateFile == "" && t.ClientCertificateKeyFile != "" {
		return nil, fmt.Errorf("client_certificate_key_file specified without client_certificate_file")
	}
	if t.ClientCertificateFile != "" && t.ClientCertificateKeyFile != "" {
		cert, err := tls.LoadX509KeyPair(t.ClientCertificateFile, t.ClientCertificateKeyFile)
		if err != nil {
			return nil, fmt.Errorf("loading client certificate key pair: %v", err)
		}
		cfg.Certificates = []tls.Certificate{cert}
	}
	if t.ClientCertificateAutomate != "" {
		// TODO: use or enable ctx.IdentityCredentials() ...
		tlsAppIface, err := ctx.App("tls")
		if err != nil {
			return nil, fmt.Errorf("getting tls app: %v", err)
		}
		tlsApp := tlsAppIface.(*caddytls.TLS)
		err = tlsApp.Manage([]string{t.ClientCertificateAutomate})
		if err != nil {
			return nil, fmt.Errorf("managing client certificate: %v", err)
		}
		cfg.GetClientCertificate = func(cri *tls.CertificateRequestInfo) (*tls.Certificate, error) {
			certs := tlsApp.AllMatchingCertificates(t.ClientCertificateAutomate)
			var err error
			for _, cert := range certs {
				err = cri.SupportsCertificate(&cert.Certificate)
				if err == nil {
					return &cert.Certificate, nil
				}
			}
			if err == nil {
				err = fmt.Errorf("no client certificate found for automate name: %s", t.ClientCertificateAutomate)
			}
			return nil, err
		}
	}

	// trusted root CAs
	if len(t.RootCAPool) > 0 || len(t.RootCAPEMFiles) > 0 {
		rootPool := x509.NewCertPool()
		for _, encodedCACert := range t.RootCAPool {
			caCert, err := decodeBase64DERCert(encodedCACert)
			if err != nil {
				return nil, fmt.Errorf("parsing CA certificate: %v", err)
			}
			rootPool.AddCert(caCert)
		}
		for _, pemFile := range t.RootCAPEMFiles {
			pemData, err := os.ReadFile(pemFile)
			if err != nil {
				return nil, fmt.Errorf("failed reading ca cert: %v", err)
			}
			rootPool.AppendCertsFromPEM(pemData)

		}
		cfg.RootCAs = rootPool
	}

	// Renegotiation
	switch t.Renegotiation {
	case "never", "":
		cfg.Renegotiation = tls.RenegotiateNever
	case "once":
		cfg.Renegotiation = tls.RenegotiateOnceAsClient
	case "freely":
		cfg.Renegotiation = tls.RenegotiateFreelyAsClient
	default:
		return nil, fmt.Errorf("invalid TLS renegotiation level: %v", t.Renegotiation)
	}

	// override for the server name used verify the TLS handshake
	cfg.ServerName = t.ServerName

	// throw all security out the window
	cfg.InsecureSkipVerify = t.InsecureSkipVerify

	// only return a config if it's not empty
	if reflect.DeepEqual(cfg, new(tls.Config)) {
		return nil, nil
	}

	return cfg, nil
}

// KeepAlive holds configuration pertaining to HTTP Keep-Alive.
type KeepAlive struct {
	// Whether HTTP Keep-Alive is enabled. Default: `true`
	Enabled *bool `json:"enabled,omitempty"`

	// How often to probe for liveness. Default: `30s`.
	ProbeInterval caddy.Duration `json:"probe_interval,omitempty"`

	// Maximum number of idle connections. Default: `0`, which means no limit.
	MaxIdleConns int `json:"max_idle_conns,omitempty"`

	// Maximum number of idle connections per host. Default: `32`.
	MaxIdleConnsPerHost int `json:"max_idle_conns_per_host,omitempty"`

	// How long connections should be kept alive when idle. Default: `2m`.
	IdleConnTimeout caddy.Duration `json:"idle_timeout,omitempty"`
}

// tcpRWTimeoutConn enforces read/write timeouts for a TCP connection.
// If it fails to set deadlines, the error is logged but does not abort
// the read/write attempt (ignoring the error is consistent with what
// the standard library does: https://github.com/golang/go/blob/c5da4fb7ac5cb7434b41fc9a1df3bee66c7f1a4d/src/net/http/server.go#L981-L986)
type tcpRWTimeoutConn struct {
	*net.TCPConn
	readTimeout, writeTimeout time.Duration
	logger                    *zap.Logger
}

func (c *tcpRWTimeoutConn) Read(b []byte) (int, error) {
	if c.readTimeout > 0 {
		err := c.TCPConn.SetReadDeadline(time.Now().Add(c.readTimeout))
		if err != nil {
			c.logger.Error("failed to set read deadline", zap.Error(err))
		}
	}
	return c.TCPConn.Read(b)
}

func (c *tcpRWTimeoutConn) Write(b []byte) (int, error) {
	if c.writeTimeout > 0 {
		err := c.TCPConn.SetWriteDeadline(time.Now().Add(c.writeTimeout))
		if err != nil {
			c.logger.Error("failed to set write deadline", zap.Error(err))
		}
	}
	return c.TCPConn.Write(b)
}

// decodeBase64DERCert base64-decodes, then DER-decodes, certStr.
func decodeBase64DERCert(certStr string) (*x509.Certificate, error) {
	// decode base64
	derBytes, err := base64.StdEncoding.DecodeString(certStr)
	if err != nil {
		return nil, err
	}

	// parse the DER-encoded certificate
	return x509.ParseCertificate(derBytes)
}

// sliceContains returns true if needle is in haystack.
func sliceContains(haystack []string, needle string) bool {
	for _, s := range haystack {
		if s == needle {
			return true
		}
	}
	return false
}

// Interface guards
var (
	_ caddy.Provisioner  = (*HTTPTransport)(nil)
	_ http.RoundTripper  = (*HTTPTransport)(nil)
	_ caddy.CleanerUpper = (*HTTPTransport)(nil)
	_ TLSTransport       = (*HTTPTransport)(nil)
)