| Age | Commit message (Collapse) | Author |
|---|
|
|
|
This splits automatic HTTPS into two phases. The first provisions the
route matchers and uses them to build the domain set and configure
auto HTTP->HTTPS redirects. This happens before the rest of the
provisioning does.
The second phase takes place at the beginning of the app start. It
attaches pointers to the tls app to each server, and begins certificate
management for the domains that were found in the first phase.
|
|
Previously, all matchers in a route would be evaluated before any
handlers were executed, and a composite route of the matching routes
would be created. This made rewrites especially tricky, since the only
way to defer later matchers' evaluation was to wrap them in a subroute,
or to invoke a "rehandle" which often caused bugs.
Instead, this new sequential design evaluates each route's matchers then
its handlers in lock-step; matcher-handlers-matcher-handlers...
If the first matching route consists of a rewrite, then the second route
will be evaluated against the rewritten request, rather than the original
one, and so on.
This should do away with any need for rehandling.
I've also taken this opportunity to avoid adding new values to the
request context in the handler chain, as this creates a copy of the
Request struct, which may possibly lead to bugs like it has in the past
(see PR #1542, PR #1481, and maybe issue #2463). We now add all the
expected context values in the top-level handler at the server, then
any new values can be added to the variable table via the VarsCtxKey
context key, or just the GetVar/SetVar functions. In particular, we are
using this facility to convey dial information in the reverse proxy.
Had to be careful in one place as the middleware compilation logic has
changed, and moved a bit. We no longer compile a middleware chain per-
request; instead, we can compile it at provision-time, and defer only the
evaluation of matchers to request-time, which should slightly improve
performance. Doing this, however, we take advantage of multiple function
closures, and we also changed the use of HandlerFunc (function pointer)
to Handler (interface)... this led to a situation where, if we aren't
careful, allows one request routed a certain way to permanently change
the "next" handler for all/most other requests! We avoid this by making
a copy of the interface value (which is a lightweight pointer copy) and
using exclusively that within our wrapped handlers. This way, the
original stack frame is preserved in a "read-only" fashion. The comments
in the code describe this phenomenon.
This may very well be a breaking change for some configurations, however
I do not expect it to impact many people. I will make it clear in the
release notes that this change has occurred.
|
|
|
|
The interface was only making things difficult; a concrete pointer is
probably best.
|
|
These will be used in the new automated documentation system
|
|
|
|
This commit goes a long way toward making automated documentation of
Caddy config and Caddy modules possible. It's a broad, sweeping change,
but mostly internal. It allows us to automatically generate docs for all
Caddy modules (including future third-party ones) and make them viewable
on a web page; it also doubles as godoc comments.
As such, this commit makes significant progress in migrating the docs
from our temporary wiki page toward our new website which is still under
construction.
With this change, all host modules will use ctx.LoadModule() and pass in
both the struct pointer and the field name as a string. This allows the
reflect package to read the struct tag from that field so that it can
get the necessary information like the module namespace and the inline
key.
This has the nice side-effect of unifying the code and documentation. It
also simplifies module loading, and handles several variations on field
types for raw module fields (i.e. variations on json.RawMessage, such as
arrays and maps).
I also renamed ModuleInfo.Name -> ModuleInfo.ID, to make it clear that
the ID is the "full name" which includes both the module namespace and
the name. This clarity is helpful when describing module hierarchy.
As of this change, Caddy modules are no longer an experimental design.
I think the architecture is good enough to go forward.
|
|
|
|
* fix OOM issue caught by fuzzing
* use ParsedAddress as the struct name for the result of ParseNetworkAddress
* simplify code using the ParsedAddress type
* minor cleanups
|
|
|
|
|
|
|
|
Errors in the 4xx range are client errors, and they don't need to be
entered into the server's error logs. 4xx errors are still recorded in
the access logs at the error level.
|
|
|
|
Fixes #2845
|
|
|
|
|
|
* logging: Initial implementation
* logging: More encoder formats, better defaults
* logging: Fix repetition bug with FilterEncoder; add more presets
* logging: DiscardWriter; delete or no-op logs that discard their output
* logging: Add http.handlers.log module; enhance Replacer methods
The Replacer interface has new methods to customize how to handle empty
or unrecognized placeholders. Closes #2815.
* logging: Overhaul HTTP logging, fix bugs, improve filtering, etc.
* logging: General cleanup, begin transitioning to using new loggers
* Fixes after merge conflict
|
|
* v2: split golangci-lint configuration into its own file to allow code editors to take advantage of it
* v2: simplify code
* v2: set the correct lint output formatting
* v2: invert the logic of linter's configuration of output formatting to allow the editor convenience over CI-specific customization. Customize the output format in CI by passing the flag.
* v2: remove irrelevant golangci-lint config
|
|
See https://caddy.community/t/v2-issues-with-multiple-server-blocks-in-caddyfile-style-config/6206/13?u=matt
Also print pid when using `caddy start`
|
|
|
|
|
|
* Begin WIP integration of HTTP/3 support
* http3: Set actual Handler, make fakeClosePacketConn type for UDP sockets
Also use latest quic-go for ALPN fix
* Manually keep track of and close HTTP/3 listeners
* Update quic-go after working through some http3 bugs
* Fix go mod
* Make http3 optional for now
|
|
|
|
v2: Refactor reverse proxy and add FastCGI support
|
|
|
|
Build was broken with commit 50961ec.
|
|
|
|
My goodness that was complicated
Blessed be request.Context
Sort of
|
|
* Add support for client TLS authentication
Signed-off-by: Alexandre Stein <alexandre_stein@interlab-net.com>
* make and use client authentication struct
* force StrictSNIHost if TLSConnPolicies is not empty
* Implement leafs verification
* Fixes issue when using multiple verification
* applies the comments from maintainers
* Apply comment
* Refactor/cleanup initial TLS client auth implementation
|
|
Along with several other changes, such as renaming caddyhttp.ServerRoute
to caddyhttp.Route, exporting some types that were not exported before,
and tweaking the caddytls TLS values to be more consistent.
Notably, we also now disable automatic cert management for names which
already have a cert (manually) loaded into the cache. These names no
longer need to be specified in the "skip_certificates" field of the
automatic HTTPS config, because they will be skipped automatically.
|
|
|
|
|
|
Differentiating middleware and responders has one benefit, namely that
it's clear which module provides the response, but even then it's not
a great advantage. Linear handler config makes a little more sense,
giving greater flexibility and simplifying the core a bit, even though
it's slightly awkward that handlers which are responders may not use
the 'next' handler that is passed in at all.
|
|
|
|
See https://github.com/golang/go/wiki/Modules#semantic-import-versioning
|
|
|
|
|
|
We should look into a way to enable this by default when TLS client auth
is configured for a server
|
|
|
|
|
|
- Fix static responder so it doesn't replace its own headers config,
and instead replaces the actual response header values
- caddyhttp.ResponseRecorder type optionally buffers response
- Add interface guards to ensure regexp matchers get provisioned
- Use default HTTP port if one is not explicitly set
- Encode middleware writes status code 200 if not written upstream
- Templates and markdown only try to execute on text responses
- Static file server sets Content-Type based on file extension only
(this whole thing -- MIME sniffing, etc -- needs more configurability)
|
|
|
|
Removes the version from the package name
|
|
|
|
|
|
|
|
|
|
|
