| Age | Commit message (Collapse) | Author |
|---|
|
While building a layer4 app for Caddy, I discovered that we need the
ability to fill a request's context just like the HTTP server does,
hence this exported function PrepareRequest().
|
|
* For `roll_size` and `roll_keep_for` directives, round up instead of down.
For example, if a user wants to be able to look back on 36 hours of logs,
but you must round to a 24-hour multiple, then it's better to round up to
48 hours (which includes the desired 36 hours) instead of down to 24 hours.
* `roll_size` had an off-by-one error that caused the size to be as much as
1 MB larger than requested. For example, requests of `1MB` and `1.1MB`
both became 2 MB. Now `1MB` means 1 MB, and `1.1MB` is rounded up to 2 MB.
|
|
With the latest commit on smallstep/certificates, placeholders in config
are no longer needed.
|
|
An upstream like https://localhost:80 is still forbidden, but an addr of
localhost:80 can be used while explicitly enabling TLS as an override;
we just don't allow the implicit behavior to be ambiguous.
|
|
When client certificate is enabled Caddy check only last certificate from
request. When this cert is not in list of trusted leaf certificates,
connection is rejected. According to RFC TLS1.x the sender's certificate
must come first in the list. Each following certificate must directly
certify the one preceding it.
This patch fix this problem - first certificate is checked instead of last.
|
|
|
|
This can lead to nicer, smaller JSON output for Caddyfiles like this:
a {
tls internal
}
b {
tls foo@bar.com
}
i.e. where the tls directive only configures automation policies, and
is merely meant to enable TLS on a server block (if it wasn't implied).
This helps keeps implicit config implicit.
Needs a little more testing to ensure it doesn't break anything
important.
|
|
* pki: Initial commit of embedded ACME server (#3021)
* reverseproxy: Support auto-managed TLS client certificates (#3021)
* A little cleanup after today's review session
|
|
Previously, matching by trying files other than the actual path of the
URI was:
file {
try_files <files...>
}
Now, the same can be done in one line:
file <files...>
As before, an empty file matcher:
file
still matches if the request URI exists as a file in the site root.
|
|
* reverse_proxy: Initial attempt at H2C transport/client support (#3218)
I have not tested this yet
* Experimentally enabling H2C server support (closes #3227)
See also #3218
I have not tested this
* reverseproxy: Clean up H2C transport a bit
* caddyhttp: Update godoc for h2c server; clarify experimental status
* caddyhttp: Fix trailers when recording responses (fixes #3236)
* caddyhttp: Tweak h2c config settings and docs
|
|
Until we finish the migration to the new acme library, we have to bring
the solver type in-house. It's small and temporary.
|
|
Coulda sworn I did this already but I think I messed up my git commands
|
|
Moving to https://github.com/caddyserver/circuitbreaker
Nobody was using it anyway -- it works well, but something got fumbled
in a refactoring *months* ago. Turns out that we forgot the interface
guards AND botched a method name (my bad) - Ok() should have been OK().
So it would always have thrown a runtime panic if it tried to be loaded.
The module itself works well, but obviously nobody used it because
nobody reported the error. Fixing this while we move it to the new repo.
Removing this removes the last Bazaar/Launchpad dependency (I think).
|
|
|
|
|
|
|
|
Also un-nest all the error handling, that was unnecessary indentation
|
|
* httpcaddyfile: Exclude access logs written to files from default log
Even though any logs can just be ignored, most users don't seem to like
configuring an access log to go to a file only to have it doubly appear
in the default log.
Related to:
- #3294
- https://caddy.community/t/v2-logging-format/7642/4?u=matt
- https://caddy.community/t/caddyfile-questions/7651/3?u=matt
* caddyhttp: General improvements to access log controls (fixes #3310)
* caddyhttp: Move log config nil check higher
* Rename LoggerName -> DefaultLoggerName
|
|
Now we take advantage of the address parsing capabilities of the HTTP
caddyfile.
|
|
|
|
* matcher: Add `split_path` option to file matcher; used in php_fastcgi
* matcher: Skip try_files split if not the final part of the filename
* matcher: Add MatchFile tests
* matcher: Clarify SplitPath godoc
|
|
Sigh, apparently Linux is incapable of distinguishing host interfaces
in socket addresses, even though it works fine on Mac. I suppose we just
have to assume that any listeners with the same port are the same
address, completely ignoring the host interface on Linux... oh well.
|
|
|
|
|
|
Panic would happen if an automation policy was specified in a singular
server block that had no hostnames in its address. Definitely an edge
case.
Fixed a bug related to checking for server blocks with a host-less key
that tried to make an automation policy. Previously if you had only two
server blocks like ":443" and another one at ":80", the one at ":443"
could not create a TLS automation policy because it thought it would
interfere with TLS automation for the block at ":80", but obviously that
key doesn't enable TLS because it is on the HTTP port. So now we are a
little smarter and count only non-HTTP-empty-hostname keys.
Also fixed a bug so that a key like "https://:1234" is sure to have TLS
enabled by giving it a TLS connection policy. (Relaxed conditions
slightly; the previous conditions were too strict, requiring there to be
a TLS conn policy already or a default SNI to be non-empty.)
Also clarified a comment thanks to feedback from @Mohammed90
|
|
|
|
Prior logic was not setting up redirects for the case when domain names
are not known, but the server still clearly has TLS enabled.
|
|
https://caddy.community/t/set-cookie-manipulation-in-reverse-proxy/7666?u=matt
|
|
|
|
|
|
|
|
|
|
|
|
|
|
These functions are called at init-time, and their inputs are hard-coded
so there are no environmental or user factors that could make it fail
or succeed; the error return values are often ignored, and when they're
not, they are usually a fatal error anyway. To ensure that a programmer
mistake is not missed, we now panic instead.
Last breaking change 🤞
|
|
|
|
|
|
We'll need that context in v2.1 when the transport can manage its own
client certificates; see #3198
|
|
Otherwise, a password prompt can occur unnecessarily.
|
|
As per https://github.com/caddyserver/caddy/issues/3051#issuecomment-611200414
|
|
* chore: make the linter happier
* chore: remove reference to maligned linter in .golangci.yml
|
|
- Create two default automation policies; if the TLS app is used in
isolation with the 'automate' certificate loader, it will now use
an internal issuer for internal-only names, and an ACME issuer for
all other names by default.
- If the HTTP Caddyfile adds an 'automate' loader, it now also adds an
automation policy for any names in that loader that do not qualify
for public certificates so that they will be issued internally. (It
might be nice if this wasn't necessary, but the alternative is to
either make auto-HTTPS logic way more complex by scanning the names in
the 'automate' loader, or to have an automation policy without an
issuer switch between default issuer based on the name being issued
a certificate - I think I like the latter option better, right now we
do something kind of like that but at a level above each individual
automation policies, we do that switch only when no automation
policies match, rather than when a policy without an issuer does
match.)
- Set the default LoggerName rather than a LoggerNames with an empty
host value, which is now taken literally rather than as a catch-all.
- hostsFromKeys, the function that gets a list of hosts from server
block keys, no longer returns an empty string in its resulting slice,
ever.
|
|
|
|
Thanks to @TristonianJones for the tip!
https://github.com/caddyserver/caddy/commit/105acfa08664c97460a6fe3fb49635618be5bcb2#r38358983
|
|
|
|
|
|
|
|
|
|
|
|
|
