| Age | Commit message (Collapse) | Author |
|---|
|
* reverseproxy: Add `handle_response` blocks to `reverse_proxy` (#3710)
* reverseproxy: complete handle_response test
* reverseproxy: Change handle_response matchers to use named matchers
reverseproxy: Add support for changing status code
* fastcgi: Remove obsolete TODO
We already have d.Err("transport already specified") in the reverse_proxy parsing code which covers this case
* reverseproxy: Fix support for "4xx" type status codes
* Apply suggestions from code review
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* caddyhttp: Reorganize response matchers
* reverseproxy: Reintroduce caddyfile.Unmarshaler
* reverseproxy: Add comment mentioning Finalize should be called
Co-authored-by: Maxime Soulé <btik-git@scoubidou.com>
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
|
|
Below is the report using `benchstat` and cmd:
`go test -run=BenchmarkHeaderREMatcher -bench=BenchmarkHeaderREMatcher -benchmem -count=10`
```
name old time/op new time/op delta
HeaderREMatcher-16 869ns ± 1% 658ns ± 0% -24.29% (p=0.000 n=10+10)
name old alloc/op new alloc/op delta
HeaderREMatcher-16 144B ± 0% 112B ± 0% -22.22% (p=0.000 n=10+10)
name old allocs/op new allocs/op delta
HeaderREMatcher-16 7.00 ± 0% 5.00 ± 0% -28.57% (p=0.000 n=10+10)
```
|
|
browse` (#4093)
Co-authored-by: Matthew Holt <mholt@users.noreply.github.com>
|
|
* caddytls: Implement remote IP connection matcher
* Implement IP range negation
If both Ranges and NotRanges are specified, both must match.
|
|
* caddyhttp: reverseproxy: fix hash selection policy
Fixes: #4135
Test: go test './...' -count=1
* caddyhttp: reverseproxy: add test to catch #4135
If you revert the last commit, the test will fail.
|
|
|
|
An idea that came up in https://caddy.community/t/save-internally-issued-wildcard-certificate-in-consul/11740, this a simple module that might be useful for anyone who uses storage modules that aren't filesystem, to let them load certs/keys externally issued for use by Caddy.
Bit goofy, since we need to fetch the certmagic.Storage during provisioning, it needs a wrapping struct instead of just being an array like `load_files`.
Future work might involve adding Caddyfile support via a subdirective of the `tls` directive maybe?
|
|
|
|
* caddyhttp: Implement better logic for inserting the HTTP->HTTPS redirs
* caddyhttp: Add integration test
|
|
|
|
Can drastically reduce costs on storage backends where scans are expensive.
Also reduced default interval to 24h.
See https://github.com/silinternational/certmagic-storage-dynamodb/issues/18
|
|
|
|
After reading a question about the `handle_response` feature of `reverse_proxy`, I realized that we didn't have a way of serving an arbitrary file with a status code other than 200. This is an issue in situations where you want to serve a custom error page in routes that are not errors, like the aforementioned `handle_response`, where you may want to retain the status code returned by the proxy but write a response with content from a file.
This feature is super simple, basically if a status code is configured (can be a status code number, or a placeholder string) then that status will be written out before serving the file - if we write the status code first, then the stdlib won't write its own (only the first HTTP status header wins).
|
|
|
|
|
|
* encode: implement prefer setting
* encode: minimum_length configurable via caddyfile
* encode: configurable content-types which to encode
* file_server: support precompressed files
* encode: use ReponseMatcher for conditional encoding of content
* linting error & documentation of encode.PrecompressedOrder
* encode: allow just one response matcher
also change the namespace of the encoders back, I accidently changed to precompressed >.>
default matchers include a * to match to any charset, that may be appended
* rounding of the PR
* added integration tests for new caddyfile directives
* improved various doc strings (punctuation and typos)
* added json tag for file_server precompress order and encode matcher
* file_server: add vary header, remove accept-ranges when serving precompressed files
* encode: move Suffix implementation to precompressed modules
|
|
(#4050)
* reverseproxy: Implement health_uri, replaces health_path, supports query
Also fixes a bug with `health_status` Caddyfile parsing , it would always only take the first character of the status code even if it didn't end with "xx".
* reverseproxy: Rename to URI, named logger, warn in Provision (for JSON)
|
|
golang.org/x/crypto/ssh/terminal is deprecated in favor of golang.org/x/term
See https://github.com/caddyserver/caddy/pull/4073/checks?check_run_id=2152150495
Error: SA1019: package golang.org/x/crypto/ssh/terminal is deprecated: this package moved to golang.org/x/term. (staticcheck)
See https://github.com/caddyserver/caddy/pull/4073/checks?check_run_id=2152228516
Error: SA1019: package golang.org/x/crypto/ssh/terminal is deprecated: this package moved to golang.org/x/term. (staticcheck)
Test: go test -count=1 './...'
|
|
|
|
|
|
|
|
* Add dark color scheme media query
* Theme search box, make everything less contrasting
* Further contrast tweaks
|
|
* httpcaddyfile: Add `error` directive for the existing handler
* httpcaddyfile: Move `error` to the end of the order
|
|
This filter is intended to be useful in scenarios where you may want to
redact a value with a static string, giving you information that the
field did previously exist and was present, but not revealing the value
itself in the logs.
This was inspired by work on adding more complete support for removing
sensitive values from logs [1]. An example use case would be the
Authorization header in request log output, for which the value should
usually not be logged, but it may be quite useful for debugging to
confirm that the header was present in the request.
[1] https://github.com/caddyserver/caddy/issues/3958
|
|
* Replace placeholders with regex groups
* using Matcher methods
* test added
* linting fix
* Revert "linting fix"
This reverts commit cafd7296f43639bbcd2601bea79a47f60763a200.
* Revert "test added"
This reverts commit 3a76cc7b0bc5dcef15ca5c8ec22efcd4067d484c.
* Revert "using Matcher methods"
This reverts commit cc34337b8ebb61d40ec343cee0fc225a694d3db6.
* tests added
|
|
|
|
https://caddy.community/t/collapsing-multiple-forward-slashes-in-path-only/11626
|
|
|
|
See https://caddy.community/t/setting-up-a-caddy-pki-based-on-a-windows-
root-ca-was-getting-pki-config/11616/7
Also improved a godoc comment in the caddytls package.
|
|
|
|
|
|
* reverseproxy: Add duration/latency placeholders (close #4012) (and #2268)
Adds 4 placeholders, one is actually outside reverse proxy though:
{http.request.duration} is how long since the server decoded the HTTP request (headers).
{http.reverse_proxy.upstream.latency} is how long it took a proxy upstream to write the response header.
{http.reverse_proxy.upstream.duration} is total time proxying to the upstream, including writing response body to client.
{http.reverse_proxy.duration} is total time spent proxying, including selecting an upstream and retries.
Obviously, most of these are only useful at the end of a request, like when writing response headers or logs.
See also: https://caddy.community/t/any-equivalent-of-request-time-and-upstream-header-time-from-nginx/11418
* Add new placeholders to documentation
|
|
|
|
|
|
I'm pretty sure this fixes a bug when the default email is used...
|
|
Proxy response bodies can now be buffered, and the size of the request body and
response body buffer can be limited. Any remaining content that doesn't fit in the
buffer will remain on the wire until it can be read; i.e. bodies are not truncated,
even if the buffer is not big enough.
This fulfills a customer requirement. This was made possible by their sponsorship!
|
|
The HTTP Caddyfile adapter can now configure the PKI app, and the acme_server directive can now be used to specify a custom CA used for issuing certificates. More customization options can follow later as needed.
|
|
Ref: https://caddy.community/t/acme-server-implementation/11256/
|
|
If `tls <email>` is used, we should apply that to all applicable default issuers, not drop them. This refactoring applies implicit ACME issuer settings from the tls directive to all default ACME issuers, like ZeroSSL.
We also consolidate some annoying logic and improve config validity checks.
Ref: https://caddy.community/t/error-obtaining-certificate-after-caddy-restart/11335/8
|
|
* caddyhttp: Implement handler abort; new 'abort' directive (close #3871)
* Move abort directive ordering; clean up redirects
Seems logical for the end-all of handlers to go at the... end.
The Connection header no longer needs to be set there, since Close is
true, and the static_response handler now does that.
|
|
This commits dds 3 separate, but very related features:
1. Automated server identity management
How do you know you're connecting to the server you think you are? How do you know the server connecting to you is the server instance you think it is? Mutually-authenticated TLS (mTLS) answers both of these questions. Using TLS to authenticate requires a public/private key pair (and the peer must trust the certificate you present to it).
Fortunately, Caddy is really good at managing certificates by now. We tap into that power to make it possible for Caddy to obtain and renew its own identity credentials, or in other words, a certificate that can be used for both server verification when clients connect to it, and client verification when it connects to other servers. Its associated private key is essentially its identity, and TLS takes care of possession proofs.
This configuration is simply a list of identifiers and an optional list of custom certificate issuers. Identifiers are things like IP addresses or DNS names that can be used to access the Caddy instance. The default issuers are ZeroSSL and Let's Encrypt, but these are public CAs, so they won't issue certs for private identifiers. Caddy will simply manage credentials for these, which other parts of Caddy can use, for example: remote administration or dynamic config loading (described below).
2. Remote administration over secure connection
This feature adds generic remote admin functionality that is safe to expose on a public interface.
- The "remote" (or "secure") endpoint is optional. It does not affect the standard/local/plaintext endpoint.
- It's the same as the [API endpoint on localhost:2019](https://caddyserver.com/docs/api), but over TLS.
- TLS cannot be disabled on this endpoint.
- TLS mutual auth is required, and cannot be disabled.
- The server's certificate _must_ be obtained and renewed via automated means, such as ACME. It cannot be manually loaded.
- The TLS server takes care of verifying the client.
- The admin handler takes care of application-layer permissions (methods and paths that each client is allowed to use).\
- Sensible defaults are still WIP.
- Config fields subject to change/renaming.
3. Dyanmic config loading at startup
Since this feature was planned in tandem with remote admin, and depends on its changes, I am combining them into one PR.
Dynamic config loading is where you tell Caddy how to load its config, and then it loads and runs that. First, it will load the config you give it (and persist that so it can be optionally resumed later). Then, it will try pulling its _actual_ config using the module you've specified (dynamically loaded configs are _not_ persisted to storage, since resuming them doesn't make sense).
This PR comes with a standard config loader module called `caddy.config_loaders.http`.
Caddyfile config for all of this can probably be added later.
COMMITS:
* admin: Secure socket for remote management
Functional, but still WIP.
Optional secure socket for the admin endpoint is designed
for remote management, i.e. to be exposed on a public
port. It enforces TLS mutual authentication which cannot
be disabled. The default port for this is :2021. The server
certificate cannot be specified manually, it MUST be
obtained from a certificate issuer (i.e. ACME).
More polish and sensible defaults are still in development.
Also cleaned up and consolidated the code related to
quitting the process.
* Happy lint
* Implement dynamic config loading; HTTP config loader module
This allows Caddy to load a dynamic config when it starts.
Dynamically-loaded configs are intentionally not persisted to storage.
Includes an implementation of the standard config loader, HTTPLoader.
Can be used to download configs over HTTP(S).
* Refactor and cleanup; prevent recursive config pulls
Identity management is now separated from remote administration.
There is no need to enable remote administration if all you want is identity
management, but you will need to configure identity management
if you want remote administration.
* Fix lint warnings
* Rename identities->identifiers for consistency
|
|
This reverts commit 0bf2046da7f2f5bf1b7d9fa055ae28de9a06ddaf.
No actual use case.
|
|
|
|
The httpError function isn't particularly useful until https://github.com/golang/go/issues/34201 is fixed in the Go standard lib.
|
|
An experimental feature, let's see if it's useful.
|
|
Prevent information loss, i.e. the encoded form that was sent by the
client, when using URL strip/replace.
|
|
Allows user to disable OCSP stapling (including support in the Caddyfile via the ocsp_stapling global option) or overriding responder URLs. Useful in environments where responders are not reachable due to firewalls.
|
|
Has been deprecated for about 6 months now because it is broken.
|
|
This changes the signature of UnmarshalGlobalFunc but this is probably OK since it's only used by this repo as far as we know.
We need this change in order to "remember" the previous value in case a global option appears more than once, which is now a possibility with the cert_issuer option since Caddy now supports multiple issuers in the order defined by the user.
Bonus: the issuer subdirective of tls now supports one-liner for "acme" when all you need to set is the directory:
issuer acme <dir>
|
|
Eliminates a fair amount of repeated code
|
