Age | Commit message (Collapse) | Author |
|
We have users that have site blocks like *.*.tld with on-demand TLS
enabled. While *.*.tld does not qualify for a publicly-trusted cert due
to its wildcards, On-Demand TLS does not actually obtain a cert with
those wildcards, since it uses the actual hostname on the handshake.
This improves on that logic, but I am still not 100% satisfied with the
result since I think we need to also check if another site block is more
specific, like foo.example.tld, which might not have on-demand TLS
enabled, and make sure an automation policy gets created before the
more general policy with on-demand...
|
|
* caddytls: Add support for ZeroSSL; add Caddyfile support for issuers
Configuring issuers explicitly in a Caddyfile is not easily compatible
with existing ACME-specific parameters such as email or acme_ca which
infer the kind of issuer it creates (this is complicated now because
the ZeroSSL issuer wraps the ACME issuer)... oh well, we can revisit
that later if we need to.
New Caddyfile global option:
{
cert_issuer <name> ...
}
Or, alternatively, as a tls subdirective:
tls {
issuer <name> ...
}
For example, to use ZeroSSL with an API key:
{
cert_issuser zerossl API_KEY
}
For now, that still uses ZeroSSL's ACME endpoint; it fetches EAB
credentials for you. You can also provide the EAB credentials directly
just like any other ACME endpoint:
{
cert_issuer acme {
eab KEY_ID MAC_KEY
}
}
All these examples use the new global option (or tls subdirective). You
can still use traditional/existing options with ZeroSSL, since it's
just another ACME endpoint:
{
acme_ca https://acme.zerossl.com/v2/DV90
acme_eab KEY_ID MAC_KEY
}
That's all there is to it. You just can't mix-and-match acme_* options
with cert_issuer, because it becomes confusing/ambiguous/complicated to
merge the settings.
* Fix broken test
This test was asserting buggy behavior, oops - glad this branch both
discovers and fixes the bug at the same time!
* Fix broken test (post-merge)
* Update modules/caddytls/acmeissuer.go
Fix godoc comment
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
* Add support for ZeroSSL's EAB-by-email endpoint
Also transform the ACMEIssuer into ZeroSSLIssuer implicitly if set to
the ZeroSSL endpoint without EAB (the ZeroSSLIssuer is needed to
generate EAB if not already provided); this is now possible with either
an API key or an email address.
* go.mod: Use latest certmagic, acmez, and x/net
* Wrap underlying logic rather than repeating it
Oops, duh
* Form-encode email info into request body for EAB endpoint
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
|
|
* Replace lego with acmez; upgrade CertMagic
* Update integration test
|
|
Sometimes this operation can take a while (we observed 7 minutes
recently, with a large, globally-distributed storage backend).
|
|
|
|
|
|
Otherwise, a password prompt can occur unnecessarily.
|
|
* chore: make the linter happier
* chore: remove reference to maligned linter in .golangci.yml
|
|
- Create two default automation policies; if the TLS app is used in
isolation with the 'automate' certificate loader, it will now use
an internal issuer for internal-only names, and an ACME issuer for
all other names by default.
- If the HTTP Caddyfile adds an 'automate' loader, it now also adds an
automation policy for any names in that loader that do not qualify
for public certificates so that they will be issued internally. (It
might be nice if this wasn't necessary, but the alternative is to
either make auto-HTTPS logic way more complex by scanning the names in
the 'automate' loader, or to have an automation policy without an
issuer switch between default issuer based on the name being issued
a certificate - I think I like the latter option better, right now we
do something kind of like that but at a level above each individual
automation policies, we do that switch only when no automation
policies match, rather than when a policy without an issuer does
match.)
- Set the default LoggerName rather than a LoggerNames with an empty
host value, which is now taken literally rather than as a catch-all.
- hostsFromKeys, the function that gets a list of hosts from server
block keys, no longer returns an empty string in its resulting slice,
ever.
|
|
This seems unnecessary for now and we can always add it in later if
people have a good reason to need it.
|
|
https://caddy.community/t/wildcard-snis-not-being-matched/7271/24?u=matt
Also use new CertMagic function for matching wildcard names
|
|
The comments in the code should explain the new logic thoroughly.
The basic problem for the issue was that we were overriding a catch-all
automation policy's explicitly-configured issuer with our own, for names
that we thought looked like public names. In other words, one could
configure an internal issuer for all names, but then our auto HTTPS
would create a new policy for public-looking names that uses the
default ACME issuer, because we assume public<==>ACME and
nonpublic<==>Internal, but that is not always the case. The new logic
still assumes nonpublic<==>Internal (on catch-all policies only), but
no longer assumes that public-looking names always use an ACME issuer.
Also fix a bug where HTTPPort and HTTPSPort from the HTTP app weren't
being carried through to ACME issuers properly. It required a bit of
refactoring.
|
|
Holy heck this was complicated
|
|
|
|
When using the default automation policy specifically, ap.Issuer would
be nil, so we'd end up overwriting the ap.magic.Issuer's default value
(after New()) with nil; this instead sets Issuer on the template before
New() is called, and no overwriting is done.
|
|
|
|
* pki: Initial commit of PKI app (WIP) (see #2502 and #3021)
* pki: Ability to use root/intermediates, and sign with root
* pki: Fix benign misnamings left over from copy+paste
* pki: Only install root if not already trusted
* Make HTTPS port the default; all names use auto-HTTPS; bug fixes
* Fix build - what happened to our CI tests??
* Fix go.mod
|
|
|
|
|
|
This is a breaking change primarily in two areas:
- Storage paths for certificates have changed
- Slight changes to JSON config parameters
Huge improvements in this commit, to be detailed more in
the release notes.
The upcoming PKI app will be powered by Smallstep libraries.
|
|
When AutomationPolicy was turned into a pointer, we continued passing
a double pointer to LoadModule, oops.
|
|
This should greatly reduce memory usage at scale. Part of an overall
effort between Caddy 2 and CertMagic to optimize for large numbers of
names.
|
|
|
|
This commit goes a long way toward making automated documentation of
Caddy config and Caddy modules possible. It's a broad, sweeping change,
but mostly internal. It allows us to automatically generate docs for all
Caddy modules (including future third-party ones) and make them viewable
on a web page; it also doubles as godoc comments.
As such, this commit makes significant progress in migrating the docs
from our temporary wiki page toward our new website which is still under
construction.
With this change, all host modules will use ctx.LoadModule() and pass in
both the struct pointer and the field name as a string. This allows the
reflect package to read the struct tag from that field so that it can
get the necessary information like the module namespace and the inline
key.
This has the nice side-effect of unifying the code and documentation. It
also simplifies module loading, and handles several variations on field
types for raw module fields (i.e. variations on json.RawMessage, such as
arrays and maps).
I also renamed ModuleInfo.Name -> ModuleInfo.ID, to make it clear that
the ID is the "full name" which includes both the module namespace and
the name. This clarity is helpful when describing module hierarchy.
As of this change, Caddy modules are no longer an experimental design.
I think the architecture is good enough to go forward.
|
|
* logging: Initial implementation
* logging: More encoder formats, better defaults
* logging: Fix repetition bug with FilterEncoder; add more presets
* logging: DiscardWriter; delete or no-op logs that discard their output
* logging: Add http.handlers.log module; enhance Replacer methods
The Replacer interface has new methods to customize how to handle empty
or unrecognized placeholders. Closes #2815.
* logging: Overhaul HTTP logging, fix bugs, improve filtering, etc.
* logging: General cleanup, begin transitioning to using new loggers
* Fixes after merge conflict
|
|
This required a custom rate limiter implementation in CertMagic
|
|
|
|
|
|
Making them pointers makes for cleaner JSON when adapting configs, if
the struct is empty now it will be omitted entirely.
The x/time/rate package was updated to support changing the burst, so
we've incorporated that here and removed a TODO.
|
|
This enables use of ACME CAs that issue shorter-lived certs
|
|
|
|
|
|
|
|
CertMagic uses the same defaults for us
|
|
|
|
|
|
Use piles from which to draw config values.
Module values can return their name, so now we can do two-way mapping
from value to name and name to value; whereas before we could only map
name to value. This was problematic with the Caddyfile adapter since
it receives values and needs to know the name to put in the config.
|
|
Along with several other changes, such as renaming caddyhttp.ServerRoute
to caddyhttp.Route, exporting some types that were not exported before,
and tweaking the caddytls TLS values to be more consistent.
Notably, we also now disable automatic cert management for names which
already have a cert (manually) loaded into the cache. These names no
longer need to be specified in the "skip_certificates" field of the
automatic HTTPS config, because they will be skipped automatically.
|
|
See https://github.com/golang/go/wiki/Modules#semantic-import-versioning
|
|
|
|
|
|
We should look into a way to enable this by default when TLS client auth
is configured for a server
|
|
|
|
|
|
|
|
Removes the version from the package name
|
|
|
|
|
|
|
|
|