summaryrefslogtreecommitdiff
path: root/caddytest/integration
AgeCommit message (Collapse)Author
2020-10-30reverseproxy: Add max_idle_conns_per_host; fix godocs (#3829)Francis Lavoie
2020-10-28httpcaddyfile: Revise automation policy generation (#3824)Matt Holt
* httpcaddyfile: Revise automation policy generation This should fix a frustrating edge case where wildcard subjects are used, which potentially get shadowed by more specific versions of themselves; see the new tests for an example. This change is motivated by an actual customer requirement. Although all the tests pass, this logic is incredibly complex and nuanced, and I'm worried it is not correct. But it took me about 4 days to get this far on a solution. I did my best. * Fix typo
2020-10-13reverseproxy: Fix dial placeholders, SRV, active health checks (#3780)Matt Holt
* reverseproxy: Fix dial placeholders, SRV, active health checks Supercedes #3776 Partially reverts or updates #3756, #3693, and #3695 * reverseproxy: add integration tests Co-authored-by: Mohammed Al Sahaf <msaa1990@gmail.com>
2020-10-02map: Apply default if mapped output is nilMatthew Holt
2020-10-02map: Reimplement; multiple outputs; optimizeMatthew Holt
2020-10-01reverseproxy: allow no port for SRV; fix regression in d55d50b (#3756)Mohammed Al Sahaf
* reverseproxy: fix breakage in handling SRV lookup introduced by 3695 * reverseproxy: validate against incompatible config options with lookup_srv * reverseproxy: add integration test cases for validations involving lookup_srv * reverseproxy: clarify the reason for skipping an iteration * grammar.. Oxford comma Co-authored-by: Francis Lavoie <lavofr@gmail.com> Co-authored-by: Francis Lavoie <lavofr@gmail.com> Fixes #3753
2020-10-01reverseproxy: default to port 80 for upstreams in Caddyfile (#3772)Mohammed Al Sahaf
* reverseproxy: default to port 80 for port-less upstream dial addresses * reverseproxy: replace integration test with an adapter test Fixes #3761
2020-09-25caddyfile: Add support for `vars` and `vars_regexp` matchers (#3730)Mohammed Al Sahaf
* caddyfile: support vars and vars_regexp matchers in the caddyfile * caddyfile: matchers: Brian Kernighan said printf is good debugging tool but didn't say keep them around
2020-09-22httpcaddyfile: Fix panic when parsing route with matchers (#3746)Francis Lavoie
Fixes #3745
2020-09-17metrics: Fix hidden panic while observing with bad exemplars (#3733)Dave Henderson
* metrics: Fixing panic while observing with bad exemplars Signed-off-by: Dave Henderson <dhenderson@gmail.com> * Minor cleanup The server is already added to the context. So, we can simply use that to get the server name, which is a field on the server. * Add integration test for auto HTTP->HTTPS redirects A test like this would have caught the problem in the first place Co-authored-by: Matthew Holt <mholt@users.noreply.github.com>
2020-09-17reverseproxy: Correct alternate port for active health checks (#3693)Mohammed Al Sahaf
* reverseproxy: construct active health-check transport from scratch (Fixes #3691) * reverseproxy: do upstream health-check on the correct alternative port * reverseproxy: add integration test for health-check on alternative port * reverseproxy: put back the custom transport for health-check http client * reverseproxy: cleanup health-check integration test * reverseproxy: fix health-check of unix socket upstreams * reverseproxy: skip unix socket tests on Windows * tabs > spaces Co-authored-by: Francis Lavoie <lavofr@gmail.com> * make the linter (and @francislavoie) happy Co-authored-by: Francis Lavoie <lavofr@gmail.com> * One more lint fix Co-authored-by: Francis Lavoie <lavofr@gmail.com> Co-authored-by: Francis Lavoie <lavofr@gmail.com>
2020-09-16httpcaddyfile: Ensure handle_path is sorted equally to handle (#3676)Francis Lavoie
* httpcaddyfile: Ensure handle_path is sorted as equal to handle * httpcaddyfile: Make mutual exclusivity grouping deterministic (I hope) * httpcaddyfile: Add comment linking to the issue being fixed * httpcaddyfile: Typo fix, comment clarity Co-authored-by: Matt Holt <mholt@users.noreply.github.com> * Update caddyconfig/httpcaddyfile/httptype.go Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
2020-09-15logging: Implement Caddyfile support for filter encoder (#3578)Francis Lavoie
* logging: Implement Caddyfile support for filter encoder * logging: Add support for parsing IP masks from strings wip * logging: Implement Caddyfile support for ip_mask * logging: Get rid of unnecessary logic to allow strings, not that useful * logging: Add adapt test
2020-09-08browse: align template to struct field renames from 4940325 (#3706)Mohammed Al Sahaf
2020-09-08reverseproxy: Add `buffer_requests` option to `reverse_proxy` directive (#3710)Francis Lavoie
2020-08-17httpcaddyfile: Improve directive sorting logic (#3658)Francis Lavoie
* httpcaddyfile: Flip `root` directive sort order * httpcaddyfile: Sort directives with any matcher before those with none * httpcaddyfile: Generalize reverse sort directives, improve logic * httpcaddyfile: Fix "spelling" issue * httpcaddyfile: Turns out the second change precludes the first httpcaddyfile: Delete test that no longer makes sense * httpcaddyfile: Shorten logic Co-authored-by: Matt Holt <mholt@users.noreply.github.com> Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
2020-08-11caddytls: Add support for ZeroSSL; add Caddyfile support for issuers (#3633)Matt Holt
* caddytls: Add support for ZeroSSL; add Caddyfile support for issuers Configuring issuers explicitly in a Caddyfile is not easily compatible with existing ACME-specific parameters such as email or acme_ca which infer the kind of issuer it creates (this is complicated now because the ZeroSSL issuer wraps the ACME issuer)... oh well, we can revisit that later if we need to. New Caddyfile global option: { cert_issuer <name> ... } Or, alternatively, as a tls subdirective: tls { issuer <name> ... } For example, to use ZeroSSL with an API key: { cert_issuser zerossl API_KEY } For now, that still uses ZeroSSL's ACME endpoint; it fetches EAB credentials for you. You can also provide the EAB credentials directly just like any other ACME endpoint: { cert_issuer acme { eab KEY_ID MAC_KEY } } All these examples use the new global option (or tls subdirective). You can still use traditional/existing options with ZeroSSL, since it's just another ACME endpoint: { acme_ca https://acme.zerossl.com/v2/DV90 acme_eab KEY_ID MAC_KEY } That's all there is to it. You just can't mix-and-match acme_* options with cert_issuer, because it becomes confusing/ambiguous/complicated to merge the settings. * Fix broken test This test was asserting buggy behavior, oops - glad this branch both discovers and fixes the bug at the same time! * Fix broken test (post-merge) * Update modules/caddytls/acmeissuer.go Fix godoc comment Co-authored-by: Francis Lavoie <lavofr@gmail.com> * Add support for ZeroSSL's EAB-by-email endpoint Also transform the ACMEIssuer into ZeroSSLIssuer implicitly if set to the ZeroSSL endpoint without EAB (the ZeroSSLIssuer is needed to generate EAB if not already provided); this is now possible with either an API key or an email address. * go.mod: Use latest certmagic, acmez, and x/net * Wrap underlying logic rather than repeating it Oops, duh * Form-encode email info into request body for EAB endpoint Co-authored-by: Francis Lavoie <lavofr@gmail.com>
2020-08-05httpcaddyfile: Allow named matchers in `route` blocks (#3632)Francis Lavoie
2020-08-03reverse_proxy: fix bidirectional streams with encodings (fix #3606) (#3620)Kevin Lin
* reverse_proxy: fix bi-h2stream breaking gzip encode handle(#3606). * reverse_proxy: check http version of both sides to avoid affecting non-h2 upstream. * Minor cleanup; apply review suggestions Co-authored-by: Matthew Holt <mholt@users.noreply.github.com>
2020-08-03httpcaddyfile: Bring `enforce_origin` and `origins` to admin config (#3595)Ye Zhihao
* Bring `ensure_origin` and `origins` to caddyfile admin config * Add unit test for caddyfile admin config update * Add caddyfile adapt test for typical admin setup * httpcaddyfile: Replace admin config error message when there's more arguments than needed Replace d.Err() to d.ArgErr() since the latter provides similarly informative error message Co-authored-by: Matt Holt <mholt@users.noreply.github.com> Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
2020-07-31httpcaddyfile: Add `compression` to http transport config (#3624)Ye Zhihao
* httpcaddyfile: Add `compression` to http transport config * Add caddyfile adapt test for typical h2c setup
2020-07-30caddytls: Replace lego with acmez (#3621)Matt Holt
* Replace lego with acmez; upgrade CertMagic * Update integration test
2020-07-20reverse_proxy: flush HTTP/2 response when ContentLength is unknown (#3561)Kevin Lin
* reverse proxy: Support more h2 stream scenarios (#3556) * reverse proxy: add integration test for better h2 stream (#3556) * reverse proxy: adjust comments as francislavoie suggests * link to issue #3556 in the comments
2020-07-17reverseproxy: Fix Caddyfile parsing for empty non-http transports (#3576)Francis Lavoie
* reverseproxy: Fix Caddyfile parsing for empty non-http transports * Update modules/caddyhttp/reverseproxy/caddyfile.go Co-authored-by: Matt Holt <mholt@users.noreply.github.com> * Rename empty transport test Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
2020-06-26caddyhttp: Add 'map' handler (#3199)Mark Sargent
* inital map implementation * resolve the value during middleware execution * use regex instead * pr feedback * renamed mmap to maphandler * refactored GetString implementation * fixed mispelling * additional feedback
2020-06-22fastcgi: Fix php_fastcgi matcher regression (#3512)Francis Lavoie
2020-06-12httpcaddyfile: New `acme_eab` option (#3492)Chris Ortman
* Adds global options for external account bindings * Maybe other people use ctags too? * Use nested block to configure external account * go format files * Restore acme_ca directive in test file * Change Caddyfile config syntax for acme_eab * Update test Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
2020-06-05httpcaddyfile: Add client_auth options to tls directive (#3335)NWHirschfeld
* reading client certificate config from Caddyfile Signed-off-by: NWHirschfeld <Niclas@NWHirschfeld.de> * Update caddyconfig/httpcaddyfile/builtins.go Co-authored-by: Francis Lavoie <lavofr@gmail.com> * added adapt test for parsing client certificate configuration from Caddyfile Signed-off-by: NWHirschfeld <Niclas@NWHirschfeld.de> * read client ca and leaf certificates from file https://github.com/caddyserver/caddy/pull/3335#discussion_r421633844 Signed-off-by: NWHirschfeld <Niclas@NWHirschfeld.de> * Update modules/caddytls/connpolicy.go * Make review adjustments Co-authored-by: Francis Lavoie <lavofr@gmail.com> Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
2020-06-01caddyfile: Add args on imports (#3423)Francis Lavoie
* caddyfile: Add support for args on imports * caddyfile: Add more import args tests
2020-05-26httpcaddyfile: New `handle_path` directive (#3281)Francis Lavoie
* caddyconfig: WIP implementation of handle_path * caddyconfig: Complete the implementation - h.NewRoute was key * caddyconfig: Add handle_path integration test * caddyhttp: Use the path matcher as-is, strip the trailing *, update test
2020-05-19httpcaddyfile: Add `auto_https` global option (#3284)Francis Lavoie
2020-05-18fastcgi: `php_fastcgi` subdirectives to override shortcut behaviour (#3255)Francis Lavoie
* fastcgi: Add new php_fastcgi subdirectives to override the shortcut * fastcgi: Support "index off" to disable redir and try_files * fastcgi: Remove whitespace to satisfy linter * fastcgi: Run gofmt * fastcgi: Make a new dispenser instead of using rewind * fastcgi: Some fmt * fastcgi: Add a couple adapt tests * fastcgi: Clean up for loops * fastcgi: Move adapt tests to separate files
2020-05-14caddytest: Refactor Caddyfile adapt tests to separate files (#3398)Francis Lavoie
2020-05-11httpcaddyfile: Shorthands for parameterized placeholders (#3305)Francis Lavoie
* httpcaddyfile: Add shorthands for parameterized placeholders httpcaddyfile: Now with regexp instead httpcaddyfile: Allow dashes, gofmt httpcaddyfile: Compile regexp only once httpcaddyfile: Cleanup struct httpcaddyfile: Optimize the replacers, pull out of the loop httpcaddyfile: Add `{port}` shorthand * httpcaddyfile: Switch `r.` to `re.`
2020-05-11core: Add support for `d` duration unit (#3323)Francis Lavoie
* caddy: Add support for `d` duration unit * Improvements to ParseDuration; add unit tests Co-authored-by: Matthew Holt <mholt@users.noreply.github.com>
2020-05-11httpcaddyfile: Make global options pluggable (#3265)Francis Lavoie
* httpcaddyfile: Make global options pluggable * httpcaddyfile: Add a global options adapt test * httpcaddyfile: Wrap err Co-Authored-By: Dave Henderson <dhenderson@gmail.com> * httpcaddyfile: Revert wrap err Co-authored-by: Dave Henderson <dhenderson@gmail.com>
2020-05-11caddyhttp: Fix merging of Caddyfile matchers in not blocks (#3379)Francis Lavoie
2020-05-05httpcaddyfile: Support single-line matchers (#3263)Francis Lavoie
* httpcaddyfile: Support single-line matchers * httpcaddyfile: Add single-line matcher test * httpcaddyfile: Add a matcher syntax adapt test
2020-04-27refactored caddytest helpers (#3285)Mark Sargent
* refactored caddytest helpers * added cookie jar support. Added support for more http verbs
2020-04-09caddytls: Fix for TLS conn policy being applied to HTTP-only servers (#3243)Matt Holt
* httpcaddyfile: Don't add TLS policy to HTTP-only server (#3193, #3223) * Account for HTTP port * Add integration test written by @sarge
2020-04-03chore: add adapt tests. fix load failure not failing tests (#3222)Mark Sargent
* add adaption tests. fix load failure not failing tests * removed unnecessary assignment
2020-04-01caddytls: Refactor certificate selection policies (close #1575)Matthew Holt
Certificate selection used to be a module, but this seems unnecessary, especially since the built-in CustomSelectionPolicy allows quite complex selection logic on a number of fields in certs. If we need to extend that logic, we can, but I don't think there are SO many possibilities that we need modules. This update also allows certificate selection to choose between multiple matching certs based on client compatibility and makes a number of other improvements in the default cert selection logic, both here and in the latest CertMagic. The hardest part of this was the conn policy consolidation logic (Caddyfile only, of course). We have to merge connection policies that we can easily combine, because if two certs are manually loaded in a Caddyfile site block, that produces two connection policies, and each cert is tagged with a different tag, meaning only the first would ever be selected. So given the same matchers, we can merge the two, but this required improving the Tag selection logic to support multiple tags to choose from, hence "tags" changed to "any_tag" or "all_tags" (but we use any_tag in our Caddyfile logic). Combining conn policies with conflicting settings is impossible, so that should return an error if two policies with the exact same matchers have non-empty settings that are not the same (the one exception being any_tag which we can merge because the logic for them is to OR them). It was a bit complicated. It seems to work in numerous tests I've conducted, but we'll see how it pans out in the release candidates.
2020-03-22ci: test local CA and update SNI tests (#3145)Mark Sargent
* run caddy tests in process * call main with run args * exclude tests - windows * include json example * disable caddyfile tests, include json test with non trusted local ca * converted SNI tests to json syntax
2020-03-17caddyhttp: Add default SNI tests (#3146)Mark Sargent
* added sni tests * set the default sni when there is no host to match * removed invalid sni test. Disabled tests that rely on host headers. * readded SNI tests. Added logging of config load times
2020-03-13caddyhttp: Fix default SNI for default conn policy (#3141)Mark Sargent
* add integration tests * removed SNI test * remove integration test condition * minor edit * fix sni when using static certificates Co-authored-by: Matt Holt <mholt@users.noreply.github.com>