summaryrefslogtreecommitdiff
path: root/caddytest/integration/caddyfile_adapt
AgeCommit message (Collapse)Author
2022-03-24httpcaddyfile: Fix #4640 (auto-HTTPS edgecase) (#4661)Francis Lavoie
Guh, this is complicated. Fixes #4640 This also follows up on #4398 (reverting it) which made a change that technically worked, but was incorrect. It changed the condition in `hostsFromKeysNotHTTP` from `&&` to `||`, but then the function no longer did what its name said it would do, and it would return hosts even if they were marked with `http://`, if they used a non-HTTP port. That wasn't the intent of it. The test added in there was kept though, because it is a valid usecase. The actual fix is to check _earlier_ whether all the addresses explicitly have `http://`, and if so we can short circuit and skip considering the rest.
2022-03-24chore: Clean up adapt test line endings (#4660)Francis Lavoie
Lots of the files were using CRLF instead of LF. Mostly my fault cause sometimes I make the files on Windows and VSCode for some reason kept making them with the wrong line endings. Sigh. Since .txt files typically default to spaces for indentation, I'm also adding an .editorconfig to ensure they use tabs instead
2022-03-22httpcaddyfile: Add 'vars' directiveMatthew Holt
See discussion in #4650
2022-03-18caddyfile: Support for raw token values; improve `map`, `expression` (#4643)Francis Lavoie
* caddyfile: Support for raw token values, improve `map`, `expression` * Applied code review comments * Rename RawVal to ValRaw Co-authored-by: Matthew Holt <mholt@users.noreply.github.com>
2022-03-09reverseproxy: copy_response and copy_response_headers for handle_response ↵Francis Lavoie
routes (#4391) * reverseproxy: New `copy_response` handler for `handle_response` routes Followup to #4298 and #4388. This adds a new `copy_response` handler which may only be used in `reverse_proxy`'s `handle_response` routes, which can be used to actually copy the proxy response downstream. Previously, if `handle_response` was used (with routes, not the status code mode), it was impossible to use the upstream's response body at all, because we would always close the body, expecting the routes to write a new body from scratch. To implement this, I had to refactor `h.reverseProxy()` to move all the code that came after the `HandleResponse` loop into a new function. This new function `h.finalizeResponse()` takes care of preparing the response by removing extra headers, dealing with trailers, then copying the headers and body downstream. Since basically what we want `copy_response` to do is invoke `h.finalizeResponse()` at a configurable point in time, we need to pass down the proxy handler, the response, and some other state via a new `req.WithContext(ctx)`. Wrapping a new context is pretty much the only way we have to jump a few layers in the HTTP middleware chain and let a handler pick up this information. Feels a bit dirty, but it works. Also fixed a bug with the `http.reverse_proxy.upstream.duration` placeholder, it always had the same duration as `http.reverse_proxy.upstream.latency`, but the former was meant to be the time taken for the roundtrip _plus_ copying/writing the response. * Delete the "Content-Length" header if we aren't copying Fixes a bug where the Content-Length will mismatch the actual bytes written if we skipped copying the response, so we get a message like this when using curl: ``` curl: (18) transfer closed with 18 bytes remaining to read ``` To replicate: ``` { admin off debug } :8881 { reverse_proxy 127.0.0.1:8882 { @200 status 200 handle_response @200 { header Foo bar } } } :8882 { header Content-Type application/json respond `{"hello": "world"}` 200 } ``` * Implement `copy_response_headers`, with include/exclude list support * Apply suggestions from code review Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
2022-03-08tracing: New OpenTelemetry module (#4361)Andrii Kushch
* opentelemetry: create a new module * fix imports * fix test * Update modules/caddyhttp/opentelemetry/README.md Co-authored-by: Dave Henderson <dhenderson@gmail.com> * Update modules/caddyhttp/opentelemetry/README.md Co-authored-by: Dave Henderson <dhenderson@gmail.com> * Update modules/caddyhttp/opentelemetry/README.md Co-authored-by: Dave Henderson <dhenderson@gmail.com> * Update modules/caddyhttp/opentelemetry/tracer.go Co-authored-by: Dave Henderson <dhenderson@gmail.com> * rename error ErrUnsupportedTracesProtocol * replace spaces with tabs in the test data * Update modules/caddyhttp/opentelemetry/README.md Co-authored-by: Francis Lavoie <lavofr@gmail.com> * Update modules/caddyhttp/opentelemetry/README.md Co-authored-by: Francis Lavoie <lavofr@gmail.com> * replace spaces with tabs in the README.md * use default values for a propagation and exporter protocol * set http attributes with helper * simplify code * Cleanup modules/caddyhttp/opentelemetry/README.md Co-authored-by: Dave Henderson <dhenderson@gmail.com> * Update link in README.md Co-authored-by: Dave Henderson <dhenderson@gmail.com> * Update documentation in README.md Co-authored-by: Dave Henderson <dhenderson@gmail.com> * Update link to naming spec in README.md Co-authored-by: Dave Henderson <dhenderson@gmail.com> * Rename module from opentelemetry to tracing Co-authored-by: Dave Henderson <dhenderson@gmail.com> * Rename span_name to span Co-authored-by: Dave Henderson <dhenderson@gmail.com> * Rename span_name to span Co-authored-by: Dave Henderson <dhenderson@gmail.com> * Simplify otel resource creation Co-authored-by: Dave Henderson <dhenderson@gmail.com> * handle extra attributes Co-authored-by: Dave Henderson <dhenderson@gmail.com> * update go.opentelemetry.io/otel/semconv to 1.7.0 Co-authored-by: Dave Henderson <dhenderson@gmail.com> * update go.opentelemetry.io/otel version * remove environment variable handling * always use tracecontext,baggage as propagators * extract tracer name into variable * rename OpenTelemetry to Tracing * simplify resource creation * update go.mod * rename package from opentelemetry to tracing * cleanup tests * update Caddyfile example in README.md * update README.md * fix test * fix module name in README.md * fix module name in README.md * change names in README.md and tests * order imports * remove redundant tests * Update documentation README.md Co-authored-by: Dave Henderson <dhenderson@gmail.com> * Fix grammar Co-authored-by: Dave Henderson <dhenderson@gmail.com> * Update comments Co-authored-by: Dave Henderson <dhenderson@gmail.com> * Update comments Co-authored-by: Dave Henderson <dhenderson@gmail.com> * update go.sum * update go.sum * Add otelhttp instrumentation, update OpenTelemetry libraries. * Use otelhttp instrumentation for instrumenting HTTP requests. This change uses context.WithValue to inject the next handler into the request context via a "nextCall" carrier struct, and pass it on to a standard Go HTTP handler returned by otelhttp.NewHandler. The underlying handler will extract the next handler from the context, call it and pass the returned error to the carrier struct. * use zap.Error() for the error log * remove README.md * update dependencies * clean up the code * change comment * move serveHTTP method from separate file * add syntax to the UnmarshalCaddyfile comment * go import the file * admin: Write proper status on invalid requests (#4569) (fix #4561) * update dependencies Co-authored-by: Dave Henderson <dhenderson@gmail.com> Co-authored-by: Francis Lavoie <lavofr@gmail.com> Co-authored-by: Vibhav Pant <vibhavp@gmail.com> Co-authored-by: Alok Naushad <alokme123@gmail.com> Co-authored-by: Cedric Ziel <cedric@cedric-ziel.com>
2022-03-06reverseproxy: Dynamic upstreams (with SRV and A/AAAA support) (#4470)Matt Holt
* reverseproxy: Begin refactor to enable dynamic upstreams Streamed here: https://www.youtube.com/watch?v=hj7yzXb11jU * Implement SRV and A/AAA upstream sources Also get upstreams at every retry loop iteration instead of just once before the loop. See #4442. * Minor tweaks from review * Limit size of upstreams caches * Add doc notes deprecating LookupSRV * Provision dynamic upstreams Still WIP, preparing to preserve health checker functionality * Rejigger health checks Move active health check results into handler-specific Upstreams. Improve documentation regarding health checks and upstreams. * Deprecation notice * Add Caddyfile support, use `caddy.Duration` * Interface guards * Implement custom resolvers, add resolvers to http transport Caddyfile * SRV: fix Caddyfile `name` inline arg, remove proto condition * Use pointer receiver * Add debug logs Co-authored-by: Francis Lavoie <lavofr@gmail.com>
2022-03-06reverseproxy: Implement trusted proxies for `X-Forwarded-*` headers (#4507)Francis Lavoie
2022-03-04fileserver: Add `pass_thru` Caddyfile option (#4613)Francis Lavoie
2022-03-01httpcaddyfile: Support explicitly turning off `strict_sni_host` (#4592)Francis Lavoie
2022-03-01reverseproxy: Move status replacement intercept to `replace_status` (#4300)Francis Lavoie
2022-02-19caddyhttp: Move HTTP redirect listener to an optional module (#4585)Francis Lavoie
2022-02-19logging: Add `roll_local_time` Caddyfile option (#4583)Francis Lavoie
2022-02-19httpcaddyfile: Disabling OCSP stapling for both managed and unmanaged (#4589)Francis Lavoie
2022-01-18caddytls: Add internal Caddyfile `lifetime`, `sign_with_root` opts (#4513)Francis Lavoie
2022-01-18httpcaddyfile: Add pki app `root` and `intermediate` cert/key config (#4514)Francis Lavoie
2022-01-18rewrite: Add `method` Caddyfile directive (#4528)Francis Lavoie
2022-01-18httpcaddyfile: Add `default_bind` global option (#4531)Francis Lavoie
2022-01-18httpcaddyfile: Fix incorrect handling of IPv6 bind addresses (#4532)Francis Lavoie
The `net.JoinHostPort()` function has some naiive logic for handling IPv6, it just checks if the host part has a `:` and if so it wraps the host part with `[ ]` but this causes our network type prefix to get wrapped as well, which is invalid for `caddy.NetworkAddress`. Instead, we can just concatenate the host and port manually here to avoid this side-effect.
2022-01-05httpcaddyfile: Support configuring `pki` app names via global options (#4450)Francis Lavoie
2022-01-04logging: Support turning off roll compression via Caddyfile (#4505)Francis Lavoie
2022-01-04headers: Fix `+` in Caddyfile to properly append rather than set (#4506)Francis Lavoie
2021-12-17reverseproxy: Fix incorrect `health_headers` Caddyfile parsing (#4485)Francis Lavoie
Fixes #4481
2021-12-13caddyhttp: Enhance vars matcher (#4433)Matt Holt
* caddyhttp: Enhance vars matcher Enable "or" logic for multiple values. Fall back to checking placeholders if not a var name. * Fix tests (thanks @mohammed90 !)
2021-12-13httpcaddyfile: Fix sorting edgecase for nested `handle_path` (#4477)Francis Lavoie
2021-12-02logging: add support for hashing data (#4434)Kévin Dunglas
* logging: add support for hashing data * Update modules/logging/filters.go Co-authored-by: wiese <wiese@users.noreply.github.com> * Update modules/logging/filters.go Co-authored-by: wiese <wiese@users.noreply.github.com> Co-authored-by: wiese <wiese@users.noreply.github.com>
2021-12-02caddyhttp: Make logging of credential headers opt-in (#4438)Francis Lavoie
2021-11-29caddyhttp: Split up logged remote address into IP and port (#4403)Francis Lavoie
2021-11-29logging: Remove common_log field and single_field encoder (#4149) (#4282)Matt Holt
2021-11-28caddyfile: make renew_interval option configurable (#4451)Rainer Borene
2021-11-24reverseproxy: Adjust defaults, document defaults (#4436)Francis Lavoie
* reverseproxy: Adjust defaults, document defaults Related to some of the issues in https://github.com/caddyserver/caddy/issues/4245, a complaint about the proxy transport defaults not being properly documented in https://caddy.community/t/default-values-for-directives/14254/6. - Dug into the stdlib to find the actual defaults for some of the timeouts and buffer limits, documenting them in godoc so the JSON docs get them next release. - Moved the keep-alive and dial-timeout defaults from `reverseproxy.go` to `httptransport.go`. It doesn't make sense to set defaults in the proxy, because then any time the transport is configured with non-defaults, the keep-alive and dial-timeout defaults are lost! - Sped up the dial timeout from 10s to 3s, in practice it rarely makes sense to wait a whole 10s for dialing. A shorter timeout helps a lot with the load balancer retries, so using something lower helps with user experience. * reverseproxy: Make keepalive interval configurable via Caddyfile * fastcgi: DialTimeout default for fastcgi transport too
2021-11-23logging: add a regexp filter (#4426)Kévin Dunglas
2021-11-23logging: add a filter for cookies (#4425)Kévin Dunglas
* feat(logging): add a filter for cookies * Improve godoc and add validation
2021-11-23logging: add a filter for query parameters (#4424)Kévin Dunglas
Co-authored-by: Matt Holt <mholt@users.noreply.github.com> Co-authored-by: Francis Lavoie <lavofr@gmail.com>
2021-10-26httpcaddyfile: Empty tls policy for internal http localhost (#4398)Marc Easen
* test: replicated empty tls automation policy issue * fix: empty tls policy for an http:// endpoint running on a non-standard http port
2021-09-17fastcgi: Implement `try_files` override in Caddyfile directive (#4347)Francis Lavoie
2021-09-11fastcgi: Fix Caddyfile parsing when `handle_response` is used (#4342)Francis Lavoie
2021-08-26httpcaddyfile: Reorder some directives (#4311)Francis Lavoie
We realized we made some mistakes with the directive ordering, so we're making some minor adjustments. `abort` and `error` don't really make sense to be after other handler directives, because you would expect to be able to "fail-fast" and throw an error before falling through to some `file_server` or `respond` typically. So we're moving them up to just before `respond`, i.e. before the common handler directives. This is also more consistent with our existing examples in the docs, which actually didn't work due to the directive ordering. See https://caddyserver.com/docs/caddyfile/directives/error#examples Also, `push` doesn't quite make sense to be after `handle`/`route`, since its job is to read from response headers to push additional resources if necessary, and `handle`/`route` may be terminal so push would not be reached if it was declared outside those. And also, it would make sense to be _before_ `templates` because a template _could_ add a `Link` header to the response dynamically.
2021-08-02httpcaddyfile: Ensure hosts to skip for logs can always be collected (#4258)Frederik Ring
* httpcaddyfile: ensure hosts to skip can always be collected Previously, some hosts that should be skipped in logging would be missed as the current logic would only collect them after encountering the first server that would log. This change makes sure the ServerLogConfig is initialized before iterating over the server blocks. * httpcaddyfile: add test case for skip hosts behavior
2021-07-01fileserver: Add `disable_canonical_uris` Caddyfile subdirective (#4222)mritd
* feat(fileserver): add 'canonical_uris' parameter to caddyfile add 'canonical_uris' parameter to caddyfile reference #2741 Signed-off-by: mritd <mritd@linux.com> * feat(file_server): rename subdirective canonical_uris to disable_canonical_uris rename subdirective canonical_uris to disable_canonical_uris Signed-off-by: mritd <mritd@linux.com> * test(caddyfile_adapt): add disable_canonical_uris subdirective test file add disable_canonical_uris subdirective test file Signed-off-by: mritd <mritd@linux.com>
2021-06-25httpcaddyfile: Don't put localhost in public APs (fix #4220)Matthew Holt
If an email is specified in global options, a site called 'localhost' shouldn't be bunched together with public DNS names in the automation policies, which get the default, public-CA issuers. Fix old test that did this. I also noticed that these two: localhost { } example.com { } and localhost, example.com { } produce slightly different TLS automation policies. The former is what the new test case covers, and we have logic that removes the empty automation policy for localhost so that auto-HTTPS can implicitly create one. (We prefer that whenever possible.) But the latter case produces two automation policies, with the second one being for localhost, with an explicit internal issuer. It's not wrong, just more explicit than it needs to be. I'd really like to completely rewrite the code from scratch that generates automation policies, hopefully there is a simpler, more correct algorithm.
2021-06-15reverseproxy: Adjust test related to #4201Matthew Holt
Commit 7c68809f4e13a7ac7c9e216a69410e7c1966c1df
2021-06-09httpcaddyfile: Don't add HTTP hosts to TLS APs (fix #4176 and fix #4198)Matthew Holt
In the Caddyfile, hosts specified for HTTP sockets (either scheme is "http" or it is on the HTTP port) should not be used as subjects in TLS automation policies (APs).
2021-06-08httpcaddyfile: Add `preferred_chains` global option and issuer subdirective ↵Klooven
(#4192) * Added preferred_chains option to Caddyfile * Caddyfile adapt tests for preferred_chains
2021-06-07caddytls: Add Caddyfile support for `propagation_timeout` (#4178)Peter Magnusson
* add propagation_timeout to UnmarshalCaddyfile - Closes #4177 * added caddyfile_adapt test
2021-06-07httpcaddyfile: Add `skip_install_trust` global option (#4153)Francis Lavoie
Fixes https://github.com/caddyserver/caddy/issues/4002
2021-05-11httpcaddyfile: Fix automation policy consolidation again (fix #4161)Matthew Holt
Also fix a previous test that asserted incorrect behavior.
2021-05-10encode: Drop `prefer` from Caddyfile (#4156)Francis Lavoie
Followup to #4150, #4151 /cc @ueffel @polarathene After a bit of discussion with @mholt, we decided to remove `prefer` as a subdirective and just go with using the order implicitly always. Simpler config, simpler docs, etc. Effectively changes 7776471 and reverts a small part of f35a7fa.
2021-05-10encode: Default to order the formats are enabled for `prefer` in Caddyfile ↵Francis Lavoie
(#4151)
2021-05-07httpcaddyfile: Add `grace_period` global option (#4152)Francis Lavoie
See https://caddyserver.com/docs/json/apps/http/#grace_period