summaryrefslogtreecommitdiff
path: root/caddyconfig/httpcaddyfile/directives.go
AgeCommit message (Collapse)Author
2022-09-15caddyhttp: Add 'skip_log' var to omit request from logs (#4691)Francis Lavoie
* caddyhttp: Implement `skip_log` handler * Refactor to use vars middleware Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
2022-09-13httpcaddyfile: Fix sorting of repeated directivesMatthew Holt
Fixes #5037
2022-08-02chore: Bump up to Go 1.19, minimum 1.18 (#4925)Francis Lavoie
2022-05-06reverseproxy: Support performing pre-check requests (#4739)Francis Lavoie
2022-04-25httpcaddyfile: Add `{vars.*}` placeholder shortcut, reverse `vars` sort ↵Francis Lavoie
order (#4726) * httpcaddyfile: Add `{vars.*}` placeholder shortcut I'm yoinking this from my https://github.com/caddyserver/caddy/pull/4657 PR because I think we should get this in ASAP for v2.5.0 along with the new `vars` directive. * Sort vars by matchers in reverse
2022-03-24httpcaddyfile: Fix #4640 (auto-HTTPS edgecase) (#4661)Francis Lavoie
Guh, this is complicated. Fixes #4640 This also follows up on #4398 (reverting it) which made a change that technically worked, but was incorrect. It changed the condition in `hostsFromKeysNotHTTP` from `&&` to `||`, but then the function no longer did what its name said it would do, and it would return hosts even if they were marked with `http://`, if they used a non-HTTP port. That wasn't the intent of it. The test added in there was kept though, because it is a valid usecase. The actual fix is to check _earlier_ whether all the addresses explicitly have `http://`, and if so we can short circuit and skip considering the rest.
2022-03-22httpcaddyfile: Add 'vars' directiveMatthew Holt
See discussion in #4650
2022-03-13chore: Comment fixes (#4634)Francis Lavoie
2022-03-09reverseproxy: copy_response and copy_response_headers for handle_response ↵Francis Lavoie
routes (#4391) * reverseproxy: New `copy_response` handler for `handle_response` routes Followup to #4298 and #4388. This adds a new `copy_response` handler which may only be used in `reverse_proxy`'s `handle_response` routes, which can be used to actually copy the proxy response downstream. Previously, if `handle_response` was used (with routes, not the status code mode), it was impossible to use the upstream's response body at all, because we would always close the body, expecting the routes to write a new body from scratch. To implement this, I had to refactor `h.reverseProxy()` to move all the code that came after the `HandleResponse` loop into a new function. This new function `h.finalizeResponse()` takes care of preparing the response by removing extra headers, dealing with trailers, then copying the headers and body downstream. Since basically what we want `copy_response` to do is invoke `h.finalizeResponse()` at a configurable point in time, we need to pass down the proxy handler, the response, and some other state via a new `req.WithContext(ctx)`. Wrapping a new context is pretty much the only way we have to jump a few layers in the HTTP middleware chain and let a handler pick up this information. Feels a bit dirty, but it works. Also fixed a bug with the `http.reverse_proxy.upstream.duration` placeholder, it always had the same duration as `http.reverse_proxy.upstream.latency`, but the former was meant to be the time taken for the roundtrip _plus_ copying/writing the response. * Delete the "Content-Length" header if we aren't copying Fixes a bug where the Content-Length will mismatch the actual bytes written if we skipped copying the response, so we get a message like this when using curl: ``` curl: (18) transfer closed with 18 bytes remaining to read ``` To replicate: ``` { admin off debug } :8881 { reverse_proxy 127.0.0.1:8882 { @200 status 200 handle_response @200 { header Foo bar } } } :8882 { header Content-Type application/json respond `{"hello": "world"}` 200 } ``` * Implement `copy_response_headers`, with include/exclude list support * Apply suggestions from code review Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
2022-03-08tracing: New OpenTelemetry module (#4361)Andrii Kushch
* opentelemetry: create a new module * fix imports * fix test * Update modules/caddyhttp/opentelemetry/README.md Co-authored-by: Dave Henderson <dhenderson@gmail.com> * Update modules/caddyhttp/opentelemetry/README.md Co-authored-by: Dave Henderson <dhenderson@gmail.com> * Update modules/caddyhttp/opentelemetry/README.md Co-authored-by: Dave Henderson <dhenderson@gmail.com> * Update modules/caddyhttp/opentelemetry/tracer.go Co-authored-by: Dave Henderson <dhenderson@gmail.com> * rename error ErrUnsupportedTracesProtocol * replace spaces with tabs in the test data * Update modules/caddyhttp/opentelemetry/README.md Co-authored-by: Francis Lavoie <lavofr@gmail.com> * Update modules/caddyhttp/opentelemetry/README.md Co-authored-by: Francis Lavoie <lavofr@gmail.com> * replace spaces with tabs in the README.md * use default values for a propagation and exporter protocol * set http attributes with helper * simplify code * Cleanup modules/caddyhttp/opentelemetry/README.md Co-authored-by: Dave Henderson <dhenderson@gmail.com> * Update link in README.md Co-authored-by: Dave Henderson <dhenderson@gmail.com> * Update documentation in README.md Co-authored-by: Dave Henderson <dhenderson@gmail.com> * Update link to naming spec in README.md Co-authored-by: Dave Henderson <dhenderson@gmail.com> * Rename module from opentelemetry to tracing Co-authored-by: Dave Henderson <dhenderson@gmail.com> * Rename span_name to span Co-authored-by: Dave Henderson <dhenderson@gmail.com> * Rename span_name to span Co-authored-by: Dave Henderson <dhenderson@gmail.com> * Simplify otel resource creation Co-authored-by: Dave Henderson <dhenderson@gmail.com> * handle extra attributes Co-authored-by: Dave Henderson <dhenderson@gmail.com> * update go.opentelemetry.io/otel/semconv to 1.7.0 Co-authored-by: Dave Henderson <dhenderson@gmail.com> * update go.opentelemetry.io/otel version * remove environment variable handling * always use tracecontext,baggage as propagators * extract tracer name into variable * rename OpenTelemetry to Tracing * simplify resource creation * update go.mod * rename package from opentelemetry to tracing * cleanup tests * update Caddyfile example in README.md * update README.md * fix test * fix module name in README.md * fix module name in README.md * change names in README.md and tests * order imports * remove redundant tests * Update documentation README.md Co-authored-by: Dave Henderson <dhenderson@gmail.com> * Fix grammar Co-authored-by: Dave Henderson <dhenderson@gmail.com> * Update comments Co-authored-by: Dave Henderson <dhenderson@gmail.com> * Update comments Co-authored-by: Dave Henderson <dhenderson@gmail.com> * update go.sum * update go.sum * Add otelhttp instrumentation, update OpenTelemetry libraries. * Use otelhttp instrumentation for instrumenting HTTP requests. This change uses context.WithValue to inject the next handler into the request context via a "nextCall" carrier struct, and pass it on to a standard Go HTTP handler returned by otelhttp.NewHandler. The underlying handler will extract the next handler from the context, call it and pass the returned error to the carrier struct. * use zap.Error() for the error log * remove README.md * update dependencies * clean up the code * change comment * move serveHTTP method from separate file * add syntax to the UnmarshalCaddyfile comment * go import the file * admin: Write proper status on invalid requests (#4569) (fix #4561) * update dependencies Co-authored-by: Dave Henderson <dhenderson@gmail.com> Co-authored-by: Francis Lavoie <lavofr@gmail.com> Co-authored-by: Vibhav Pant <vibhavp@gmail.com> Co-authored-by: Alok Naushad <alokme123@gmail.com> Co-authored-by: Cedric Ziel <cedric@cedric-ziel.com>
2022-01-18rewrite: Add `method` Caddyfile directive (#4528)Francis Lavoie
2021-12-13httpcaddyfile: Fix sorting edgecase for nested `handle_path` (#4477)Francis Lavoie
2021-10-26httpcaddyfile: Empty tls policy for internal http localhost (#4398)Marc Easen
* test: replicated empty tls automation policy issue * fix: empty tls policy for an http:// endpoint running on a non-standard http port
2021-08-26httpcaddyfile: Reorder some directives (#4311)Francis Lavoie
We realized we made some mistakes with the directive ordering, so we're making some minor adjustments. `abort` and `error` don't really make sense to be after other handler directives, because you would expect to be able to "fail-fast" and throw an error before falling through to some `file_server` or `respond` typically. So we're moving them up to just before `respond`, i.e. before the common handler directives. This is also more consistent with our existing examples in the docs, which actually didn't work due to the directive ordering. See https://caddyserver.com/docs/caddyfile/directives/error#examples Also, `push` doesn't quite make sense to be after `handle`/`route`, since its job is to read from response headers to push additional resources if necessary, and `handle`/`route` may be terminal so push would not be reached if it was declared outside those. And also, it would make sense to be _before_ `templates` because a template _could_ add a `Link` header to the response dynamically.
2021-08-25httpcaddyfile: Improve unrecognized directive errorsMatthew Holt
2021-06-09httpcaddyfile: Don't add HTTP hosts to TLS APs (fix #4176 and fix #4198)Matthew Holt
In the Caddyfile, hosts specified for HTTP sockets (either scheme is "http" or it is on the HTTP port) should not be used as subjects in TLS automation policies (APs).
2021-05-02reverseproxy: Add `handle_response` blocks to `reverse_proxy` (#3710) (#4021)Francis Lavoie
* reverseproxy: Add `handle_response` blocks to `reverse_proxy` (#3710) * reverseproxy: complete handle_response test * reverseproxy: Change handle_response matchers to use named matchers reverseproxy: Add support for changing status code * fastcgi: Remove obsolete TODO We already have d.Err("transport already specified") in the reverse_proxy parsing code which covers this case * reverseproxy: Fix support for "4xx" type status codes * Apply suggestions from code review Co-authored-by: Matt Holt <mholt@users.noreply.github.com> * caddyhttp: Reorganize response matchers * reverseproxy: Reintroduce caddyfile.Unmarshaler * reverseproxy: Add comment mentioning Finalize should be called Co-authored-by: Maxime Soulé <btik-git@scoubidou.com> Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
2021-03-12httpcaddyfile: Add `error` directive for the existing handler (#4034)Francis Lavoie
* httpcaddyfile: Add `error` directive for the existing handler * httpcaddyfile: Move `error` to the end of the order
2021-01-28caddyhttp: Implement handler abort; new 'abort' directive (close #3871) (#3983)Matt Holt
* caddyhttp: Implement handler abort; new 'abort' directive (close #3871) * Move abort directive ordering; clean up redirects Seems logical for the end-all of handlers to go at the... end. The Connection header no longer needs to be set there, since Close is true, and the static_response handler now does that.
2021-01-07httpcaddyfile: Support repeated use of cert_issuer global optionMatthew Holt
This changes the signature of UnmarshalGlobalFunc but this is probably OK since it's only used by this repo as far as we know. We need this change in order to "remember" the previous value in case a global option appears more than once, which is now a possibility with the cert_issuer option since Caddy now supports multiple issuers in the order defined by the user. Bonus: the issuer subdirective of tls now supports one-liner for "acme" when all you need to set is the directory: issuer acme <dir>
2020-11-20headers: Support default header values in Caddyfile with '?' (#3807)Gilbert Gilb's
* implement default values for header directive closes #3804 * remove `set_default` header op and rely on "require" handler instead This has the following advantages over the previous attempt: - It does not introduce a new operation for headers, but rather nicely extends over an existing feature in the header handler. - It removes the need to specify the header as "deferred" because it is already implicitely deferred by the use of the require handler. This should be less confusing to the user. * add integration test for header directive in caddyfile * bubble up errors when parsing caddyfile header directive * don't export unnecessarily and don't canonicalize headers unnecessarily * fix response headers not passed in blocks * caddyfile: fix clash when using default header in block Each header is now set in a separate handler so that it doesn't clash with other headers set/added/deleted in the same block. * caddyhttp: New idle_timeout default of 5m * reverseproxy: fix random hangs on http/2 requests with server push (#3875) see https://github.com/golang/go/issues/42534 * Refactor and cleanup with improvements * More specific link Co-authored-by: Matthew Holt <mholt@users.noreply.github.com> Co-authored-by: Денис Телюх <telyukh.denis@gmail.com>
2020-11-16requestbody: Add Caddyfile support (#3859)Nicola Piccinini
* Add Caddyfile support for request_body: ``` request_body { max_size 10000000 } ``` * Improve Caddyfile parser for request_body module * Remove unnecessary `continue` * Add sample for caddyfile_adapt_test
2020-09-22httpcaddyfile: Fix panic when parsing route with matchers (#3746)Francis Lavoie
Fixes #3745
2020-09-21httpcaddyfile: Disallow args on route/handle directive family (#3740)Francis Lavoie
2020-09-17metrics: Initial integration of Prometheus metrics (#3709)Dave Henderson
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
2020-08-17httpcaddyfile: Improve directive sorting logic (#3658)Francis Lavoie
* httpcaddyfile: Flip `root` directive sort order * httpcaddyfile: Sort directives with any matcher before those with none * httpcaddyfile: Generalize reverse sort directives, improve logic * httpcaddyfile: Fix "spelling" issue * httpcaddyfile: Turns out the second change precludes the first httpcaddyfile: Delete test that no longer makes sense * httpcaddyfile: Shorten logic Co-authored-by: Matt Holt <mholt@users.noreply.github.com> Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
2020-08-05httpcaddyfile: Allow named matchers in `route` blocks (#3632)Francis Lavoie
2020-07-20push: Implement HTTP/2 server push (#3573)Matt Holt
* push: Implement HTTP/2 server push (close #3551) * push: Abstract header ops by embedding into new struct type This will allow us to add more fields to customize headers in push-specific ways in the future. * push: Ensure Link resources are pushed before response is written * Change header name from X-Caddy-Push to Caddy-Push
2020-06-26caddyhttp: Add 'map' handler (#3199)Mark Sargent
* inital map implementation * resolve the value during middleware execution * use regex instead * pr feedback * renamed mmap to maphandler * refactored GetString implementation * fixed mispelling * additional feedback
2020-06-03caddypki: Add 'acme_server' Caddyfile directiveMatthew Holt
2020-05-26httpcaddyfile: New `handle_path` directive (#3281)Francis Lavoie
* caddyconfig: WIP implementation of handle_path * caddyconfig: Complete the implementation - h.NewRoute was key * caddyconfig: Add handle_path integration test * caddyhttp: Use the path matcher as-is, strip the trailing *, update test
2020-05-11httpcaddyfile: Make global options pluggable (#3265)Francis Lavoie
* httpcaddyfile: Make global options pluggable * httpcaddyfile: Add a global options adapt test * httpcaddyfile: Wrap err Co-Authored-By: Dave Henderson <dhenderson@gmail.com> * httpcaddyfile: Revert wrap err Co-authored-by: Dave Henderson <dhenderson@gmail.com>
2020-05-06httpcaddyfile: Fix route ordering bugMatthew Holt
https://caddy.community/t/cant-get-simple-alias-to-work/7911/8?u=matt This removes an optimization where we amortized path matcher decoding. The decoded matchers were index by... position... which obviously changes during sorting. Duh. Anyway, sorting is sliiightly slower now but the Caddyfile is not really CPU-sensitive, so this is fine.
2020-04-08httpcaddyfile, caddytls: Multiple edge case fixes; add testsMatthew Holt
- Create two default automation policies; if the TLS app is used in isolation with the 'automate' certificate loader, it will now use an internal issuer for internal-only names, and an ACME issuer for all other names by default. - If the HTTP Caddyfile adds an 'automate' loader, it now also adds an automation policy for any names in that loader that do not qualify for public certificates so that they will be issued internally. (It might be nice if this wasn't necessary, but the alternative is to either make auto-HTTPS logic way more complex by scanning the names in the 'automate' loader, or to have an automation policy without an issuer switch between default issuer based on the name being issued a certificate - I think I like the latter option better, right now we do something kind of like that but at a level above each individual automation policies, we do that switch only when no automation policies match, rather than when a policy without an issuer does match.) - Set the default LoggerName rather than a LoggerNames with an empty host value, which is now taken literally rather than as a catch-all. - hostsFromKeys, the function that gets a list of hosts from server block keys, no longer returns an empty string in its resulting slice, ever.
2020-04-02httpcaddyfile: Refactor site key parsing; detect conflicting schemesMatthew Holt
We now store the parsed site/server block keys with the server block, rather than parsing the addresses every time we read them. Also detect conflicting schemes, i.e. TLS and non-TLS cannot be served from the same server (natively -- modules could be built for it). Also do not add site subroutes (subroutes generated specifically from site blocks in the Caddyfile) that are empty.
2020-03-28httpcaddyfile: Put root directive first, before redir and rewriteMatthew Holt
See https://caddy.community/t/v2-match-any-path-but-files/7326/8?u=matt If rewrites (or redirects, for that matter) match on file existence, the file matcher would need to know the root of the site. Making this change implies that root directives that depend on rewritten URIs will not work as expected. However, I think this is very uncommon, and am not sure I have ever seen that. Usually, dynamic roots are based on host, not paths or query strings. I suspect that rewrites based on file existence will be more common than roots based on rewritten URIs, so I am moving root to be the first in the list. Users can always override this ordering with the 'order' global option.
2020-03-22httpcaddyfile: Move header before redir (fixes #3148)Matthew Holt
2020-03-19httpcaddyfile: Unify strip_prefix, strip_suffix, uri_replace directives (#3157)Matt Holt
* rewrite: strip_prefix, strip_suffix, uri_replace -> uri (closes #3140) * Add period, to satisfy @whitestrake :) and my own OCD * Restore implied / prefix
2020-03-04httpcaddyfile: remove certificate tags from global state (#3111)Mark Sargent
* remove the certificate tag tracking from global state * refactored helper state, added log counter * moved state initialisation close to where it is used. * added helper state comment
2020-02-28Simplify the logic in the previous commitMatthew Holt
2020-02-28httpcaddyfile: Treat no matchers as 0-len path matchers (fix #3100)Matthew Holt
+ a couple other minor changes from linter
2020-02-27Refactor ExtractMatcherSet()Matthew Holt
2020-02-25httpcaddyfile: Matchers can now be embedded into a nested scopeMatthew Holt
This is useful in 'handle' and 'route' directives, for instance, if you want to keep your matcher definitions by the directives that use them.
2020-02-16httpcaddyfile: 'handle_errors' directiveMatthew Holt
Not sure I love the name of the directive; might change it later.
2020-01-22httpcaddyfile: Rename 'headers' directive to 'header'Matthew Holt
2020-01-22httpcaddyfile: Update directive docs; put root after rewriteMatthew Holt
2020-01-17httpcaddyfile: Move redir before rewriteMatthew Holt
Using rewrite is like saying, "I accept this request, but I just need to act on it as if it came in differently." Whereas redir implies more of, "I reject this request, send it to me differently, then I will process it." Makes sense for it to come before rewrites. This can always be changed using the 'order' global option if needed.
2020-01-16httpcaddyfile: Fix nested blocks; add handle directive; refactorMatthew Holt
The fix that was initially put forth in #2971 was good, but only for up to one layer of nesting. The real problem was that we forgot to increment nesting when already inside a block if we saw another open curly brace that opens another block (dispenser.go L157-158). The new 'handle' directive allows HTTP Caddyfiles to be designed more like nginx location blocks if the user prefers. Inside a handle block, directives are still ordered just like they are outside of them, but handler blocks at a given level of nesting are mutually exclusive. This work benefitted from some refactoring and cleanup.
2020-01-16httpcaddyfile: Replace 'handler_order' option with 'order'Matthew Holt
This allows individual directives to be ordered relative to others, where order matters (for example HTTP handlers). Will primarily be useful when developing new directives, so you don't have to modify the Caddy source code. Can also be useful if you prefer that redir comes before rewrite, for example. Note that these are global options. The route directive can be used to give a specific order to a specific group of HTTP handler directives.
2020-01-16httpcaddyfile: Group try_files routes together (#2891)Matthew Holt
This ensures that only the first matching route is used.
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-03 19:42:45 +0000