| Age | Commit message (Collapse) | Author |
|---|
|
* add propagation_timeout to UnmarshalCaddyfile
- Closes #4177
* added caddyfile_adapt test
|
|
This commit changes the file_server directive to redirect using the
original request's URL instead of the possibly trimmed URL. This should
make file_server work with handle_path.
This fix is taken from mholt's comment in
https://caddy.community/t/file-servers-on-different-paths-not-working/11698/11.
|
|
Fixes https://github.com/caddyserver/caddy/issues/4002
|
|
|
|
See golang/go#46313
Based on https://github.com/golang/go/commit/950fa11c4cb01a145bb07eeb167d90a1846061b3
|
|
|
|
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
|
|
|
|
Ubuntu's package updater doesn't show the name of the package, so just adding "Caddy" to the description helps a lot
|
|
* logging: Implement dial timeout for net writer (fix #4083)
* Limit how often redials are attempted
This should cause dial blocking to occur only once every 10 seconds at most, but it also means the logger connection might be down for up to 10 seconds after it comes back online; oh well. We shouldn't block for DialTimeout at every single log emission.
* Clarify offline behavior
|
|
|
|
Fix regression from ab80ff4fd2911afc394b9dbceeb9f71c7a0b7ec1 (probably a mistake when rebasing)
See https://caddy.community/t/id-selector-is-not-working-after-upgrade-to-2-4-0/12513?u=matt
|
|
* caddyfile: Add parse error on site address in `{`
This is an incredibly common mistake made by users, so we should catch it earlier in the parser and give a more friendly message. Often it ends up adapting but with mistakes, or erroring out later due to other site addresses being read as directives.
There's not really ever a situation where a lone '{' is valid at the end of a site address (but I suppose there are edgecases where the user wants to use a path matcher where it ends specifically in `{`, but... why?), so this should be fine.
* Update caddyconfig/caddyfile/parse.go
|
|
Turns out this was an oversight, we assumed we could use `{http.response.header.*}` but that doesn't work because those are grabbed from the response writer, and we haven't copied any headers into the response writer yet.
So the fix is to set all the response headers into the replacer at a new namespace before running the handlers.
This adds the `{http.reverse_proxy.header.*}` replacer.
See https://caddy.community/t/empty-http-response-header-x-accel-redirect/12447
|
|
We decided that we'll use branches like `2.4` as the target for any changes that we might want to release in a `2.4.x` version like `2.4.1`, so that we can continue to merge changes targeting the next minor release (e.g. `2.5.0`) on master.
Our CI config wasn't set up for this to work properly though, since it was only running checks on PRs targeting master. This should fix it.
I couldn't find a way to do a pattern to only match digits for the branch names from Github's docs, it just looks like a pretty generic glob syntax. But this should do until we get to 3.0
|
|
|
|
Also fix a previous test that asserted incorrect behavior.
|
|
* caddyfile(formatter): fix nesting not decrementing
This is an extremely weird edge-case where if you had a environment variable {}
on one line, a comment on the next line, and the closing of the block on the
following line; the rest of the Caddyfile would be indented further than it
should've been.
ref; https://github.com/matthewpi/vscode-caddyfile-support/issues/13
* run gofmt
* fmt: better way of handling edge case
|
|
Followup to #4150, #4151 /cc @ueffel @polarathene
After a bit of discussion with @mholt, we decided to remove `prefer` as a subdirective and just go with using the order implicitly always. Simpler config, simpler docs, etc.
Effectively changes 7776471 and reverts a small part of f35a7fa.
|
|
(#4151)
|
|
Fixes #3922
|
|
See https://caddyserver.com/docs/json/apps/http/#grace_period
|
|
* caddyhttp: Fix fallback for the error handler chain
The fix I went with in the end (after realizing some mistaken assumptions in #4131) is to just make the routes fall back to errorEmptyHandler instead of the non-error empty handler, if Terminal is true, making the routes error-aware. Ultimately this was probably just an oversight when errors was implemented at some point in the early betas of v2.
See https://caddy.community/t/problem-with-basicauth-handle-errors/12243/9 for context.
* Revert "caddyhttp: Fix fallback for the error handler chain"
This reverts commit 95b6ac44a6122d3ca5513a13bbc723cd5f4785f8.
* caddyhttp: Fix via `routes.go`
|
|
|
|
* fileserver: Fix `file` matcher with empty `try_files`
Fixes https://github.com/caddyserver/caddy/issues/4146
If `TryFiles` is empty, we fill it with `r.URL.Path`. In this case, this is `/`. Then later, in `prepareFilePath()`, we run the replacer (which turns `{path}` into `/` at that point) but `file` remains the original value (and the placeholder is still the placeholder there).
So then `strings.HasSuffix(file, "/")` will be `false` for the placeholder, but `true` for the empty `TryFiles` codepath, because `file` was `/` due to being set to the actual request value beforehand.
This means that `suffix` becomes `//` in that case, so after `sanitizedPathJoin`, it becomes `./`, so `strictFileExists`'s `strings.HasSuffix(file, separator)` codepath will return true.
I think we should change the `m.TryFiles == nil` codepath to `m.TryFiles = []string{"{http.request.uri.path}"}` for consistency. (And maybe consider hoisting this to `Provision` cause there's no point doing this on every request). I don't think this "optimization" of directly using `r.URL.Path` is so valuable, cause it causes this edgecase with directories.
* Update modules/caddyhttp/fileserver/matcher.go
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
|
|
|
|
* reverseproxy: Add `handle_response` blocks to `reverse_proxy` (#3710)
* reverseproxy: complete handle_response test
* reverseproxy: Change handle_response matchers to use named matchers
reverseproxy: Add support for changing status code
* fastcgi: Remove obsolete TODO
We already have d.Err("transport already specified") in the reverse_proxy parsing code which covers this case
* reverseproxy: Fix support for "4xx" type status codes
* Apply suggestions from code review
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* caddyhttp: Reorganize response matchers
* reverseproxy: Reintroduce caddyfile.Unmarshaler
* reverseproxy: Add comment mentioning Finalize should be called
Co-authored-by: Maxime Soulé <btik-git@scoubidou.com>
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
|
|
* add envfile in start cmd
* fix commandfuncs
* fix commandfuncs
* fix cmdStart envfile from bool to string
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
|
|
|
|
Followup to https://github.com/caddyserver/caddy/commit/42b7134ffa3bf3e9e86514c82407979c2627a5ab
|
|
Below is the report using `benchstat` and cmd:
`go test -run=BenchmarkHeaderREMatcher -bench=BenchmarkHeaderREMatcher -benchmem -count=10`
```
name old time/op new time/op delta
HeaderREMatcher-16 869ns ± 1% 658ns ± 0% -24.29% (p=0.000 n=10+10)
name old alloc/op new alloc/op delta
HeaderREMatcher-16 144B ± 0% 112B ± 0% -22.22% (p=0.000 n=10+10)
name old allocs/op new allocs/op delta
HeaderREMatcher-16 7.00 ± 0% 5.00 ± 0% -28.57% (p=0.000 n=10+10)
```
|
|
browse` (#4093)
Co-authored-by: Matthew Holt <mholt@users.noreply.github.com>
|
|
* caddytls: Implement remote IP connection matcher
* Implement IP range negation
If both Ranges and NotRanges are specified, both must match.
|
|
* httpcaddyfile: Fix unexpectedly removed policy
When user set on_demand tls option in a catch-all (:443) policy,
we expect other policies to not have the on_demand enabled
See ex in tls_automation_policies_5.txt
Btw, we can remove policies if they are **all** empty.
* Update caddyconfig/httpcaddyfile/tlsapp.go
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
|
|
* caddyhttp: reverseproxy: fix hash selection policy
Fixes: #4135
Test: go test './...' -count=1
* caddyhttp: reverseproxy: add test to catch #4135
If you revert the last commit, the test will fail.
|
|
|
|
* caddyfile: Fix `import` replacing unrelated placeholders
See https://caddy.community/t/snippet-issue-works-outside-snippet/12231
So it turns out that `NewReplacer()` gives a replacer with some global defaults (like `{env.*}` and some system and time placeholders), which is not ideal when running `import` because we just want to replace `{args.*}` only, and nothing else.
* caddyfile: Add test
|
|
An idea that came up in https://caddy.community/t/save-internally-issued-wildcard-certificate-in-consul/11740, this a simple module that might be useful for anyone who uses storage modules that aren't filesystem, to let them load certs/keys externally issued for use by Caddy.
Bit goofy, since we need to fetch the certmagic.Storage during provisioning, it needs a wrapping struct instead of just being an array like `load_files`.
Future work might involve adding Caddyfile support via a subdirective of the `tls` directive maybe?
|
|
|
|
* caddyhttp: Implement better logic for inserting the HTTP->HTTPS redirs
* caddyhttp: Add integration test
|
|
|
|
|
|
|
|
Can drastically reduce costs on storage backends where scans are expensive.
Also reduced default interval to 24h.
See https://github.com/silinternational/certmagic-storage-dynamodb/issues/18
|
|
* caddyfile: reject recursive self-imports
* caddyfile: detect and reject cyclic imports of snippets and files
* caddyfile: do not be stickler about connected nodes not being connected already
* caddyfile: include missing test artifacts of cyclic imports
* address review comments
|
|
|
|
After reading a question about the `handle_response` feature of `reverse_proxy`, I realized that we didn't have a way of serving an arbitrary file with a status code other than 200. This is an issue in situations where you want to serve a custom error page in routes that are not errors, like the aforementioned `handle_response`, where you may want to retain the status code returned by the proxy but write a response with content from a file.
This feature is super simple, basically if a status code is configured (can be a status code number, or a placeholder string) then that status will be written out before serving the file - if we write the status code first, then the stdlib won't write its own (only the first HTTP status header wins).
|
|
Initial sd_notify support was added in #3963, but that sent signals from
both cmdRun and cmdReload. This approach has two drawbacks:
- Reloads initiated via the API do not send signals.
- The signals are sent from different processes, which requires the
`NotifyAccess=exec` directive in the unit file.
This change moves the NotifyReloading and NotifyReadiness invocations to
Load, which address both of those drawbacks. It also adds a
complimentary NotifyStopping method which is invoked from handleStop.
All the notify methods are defined in a notify package to avoid an
import loop.
|
|
|
|
* httpcaddyfile: Add reproduce test
* httpcaddyfile: Don't allow `i` to go below zero
|
